Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X75SB
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X75SB is a genuine HLQ slide-table cylinder, 12 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 85 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore12 mm
- Push thrust @0.5 MPa85 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X75SB
A ball-bearing slide-table cylinder combines a double-acting air cylinder with an integrated linear guide so the moving table travels in a precise straight line. The HLQ12X75SB uses a ball-bearing guide with a 12 mm bore and 75 mm stroke, giving moderate thrust through its dual-rod design; a floating joint spares the rods from side torque. Ball-bearing guides are anti-rust and dust-proof, suited to clean or mildly humid environments.
This is a genuine AirTAC part with a standard sintered magnet for position sensing; compatible sensor switches include CMSH, DMSH and EMSH series, which fit the magnetic-switch slots on the body. We confirm thrust, dimensions, allowable load and moment from the AirTAC datasheet or on-page specification table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X75SB Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ12X75SB |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 12 mm |
| Push thrust @0.5 MPa | 85 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 12 gives more push than the smallest bores while remaining compact; choose a larger bore in the HLQ series (16, 20 or 25) if your application needs higher thrust. The ball-bearing guide suits applications where anti-rust and dust-proofing matter more than the ultimate rigidity of a cross-roller guide. Stroke 75 mm falls within the bore-12 stroke table. This model carries shock absorbers at both ends (adjuster code B) for smoother end-of-stroke deceleration; if you only need damping on one side, look at BS (extension) or BF (retraction) variants. Thread is PT; G or NPT options are available under their respective codes. We confirm allowable load, moment and kinetic energy from the published AirTAC tables and deflection curves.
Applications
Pick-and-Place Head
Mounts a small gripper for precise linear traverse between loading and unloading stations on an assembly line.
Parts Transfer Stopper
Extends across a conveyor to arrest small workpieces at an inspection or pick-off position with low deflection.
Assembly Stage Slide
Carries a pressing or probing tool through a 75 mm stroke into a fixture with repeatable end-position accuracy.
FAQ
What does the B adjuster code mean on this HLQ12 slide table?
The B in HLQ12X75SB indicates shock absorbers at both ends of the stroke for smoother deceleration. Other options include BS (extension side only) and BF (retraction side only); bore 6 does not offer B-type adjusters.
What is the maximum operating pressure for the HLQ12?
Maximum working pressure is 0.7 MPa (100 psi). Operating pressure for bore 12 is 0.15-0.7 MPa (22-100 psi). Meter-out speed control keeps travel between 50 and 500 mm/s.