Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X10SAF
1. Dual precision linear guides ensure high accuracy, high rigidity, and integrated rust/dust resistance
2. Pre-machined through-holes on slider for convenient top-side body fixation
3. Built-in locating pin holes on slider for precise alignment
4. Floating joint design prevents piston rods from bearing external torsional loads
5. Double-piston rod configuration delivers doubled output force
6. Integrated locating pin holes on main body for accurate positioning
7. Mounting screw holes on base surface and end faces for flexible installation
Category: Slide Cylinders | Brand: AirTAC | Series: HLQ
AirTAC HLQ16X10SAF Dual-Axis Precision Slide Cylinder Specifications
- Model: HLQ16X10SAF
- Type: Dual-axis guided slide cylinder with linear guide rails
- Bore size: 16mm
- Stroke: 10mm (customizable 5-300mm)
- Operating pressure: 0.1-0.8 MPa
- Repeat positioning accuracy: ±0.01mm
- Max speed: 500mm/s
- Load capacity: 3.5N·m (radial), 10N (axial)
- Guide type: Dual linear ball bearings
- Seal material: NBR/FKM (optional fluorocarbon)
- Temperature range: -10℃ to 80℃
- Mounting options: Horizontal/Vertical with M4 threaded holes
- Weight: 1.8kg (with 10mm stroke)
- Dimensions: 135mm(L) × 40mm(W) × 38mm(H)
- Protection rating: IP54 (standard dust/water resistance)
- Lubrication: Pre-lubricated (regreasing interval: 1,000km travel)
High-precision dual-axis slide cylinder featuring hardened steel guide rails and low-friction seals. The integrated linear bearings provide exceptional straightness (≤0.02mm/100mm) and minimal stick-slip effect. Includes adjustable cushioning mechanism and anti-corrosion surface treatment (black oxide coating). Compatible with vacuum environments when paired with optional seals.
- Semiconductor wafer handling robots
- Micro-dispensing systems in PCB assembly
- Optical lens alignment stages
- Medical device test equipment
- 3D printing head positioning systems
- Precision metrology instruments
Installation tips:
Use precision mounting surfaces with flatness ≤0.02mm. Avoid side load exceeding 15% of axial capacity.
For vertical mounting, install stopper mechanism to prevent unintended descent during power loss.
- Stroke adjustment: Increments of 1mm
- Rod end styles: Threaded, flange, or clevis
- Position feedback: Optional magnetic sensor slots (PNP/NPN)
- Special coatings: Nickel-plated or PTFE variants for cleanrooms
| Property | Property Value |
|---|---|
| sku | HLQ16X10SAF |
| External Stop Block Type | Rear end stroke adjusting screw |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | M5×0.8 |
| Magnet | S-Magnetic |
| Bore Diameter | 16mm |
| Stroke | <10mm> |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.