Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X10SAS
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X10SAS is a genuine HLQ slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X10SAS
The AirTAC HLQ16X10SAS is a double-acting dual-rod slide-table cylinder combining an air cylinder with a ball-bearing linear guide for straight, low-deflection table travel. The floating joint prevents side torque on the rods, and the dual-rod construction doubles thrust for moderate force appropriate to a bore 16 mm unit. The AS adjuster provides an adjustable rubber stopper on the extension side for controlled forward end-positioning.
This is a genuine AirTAC part fitted with a standard magnet for position detection. Sensor switches from the CMSH, DMSH, or EMSH series install into the magnetic-switch slots machined into the body. We confirm thrust, dimensions, and allowable load/moment from the datasheet or on-page spec table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X10SAS Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X10SAS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 16 mm delivers moderate thrust for typical guided handling; for higher thrust, move up to bore 20 or 25 in the HLQ series. The HLQ ball-bearing guide offers anti-rust, dust-proof performance ideal for environments where smooth travel and corrosion resistance are priorities over the maximum rigidity of an HLS cross-roller table. Stroke 10 mm is within the bore 16 range.
The AS rubber stopper is installed on the extension end only, with the standard bumper on retraction. Thread is PT. For load and moment verification, send us your application parameters and we will check them against the published Wmax, Emax, and moment tables and deflection curves.
Applications
Pick-and-Place Head
Mount a vacuum nozzle on the guided table for precise component placement with an adjustable rubber stopper controlling the forward end position.
Small-Parts Transfer
Push lightweight parts between workstations with dust-proof ball-bearing guidance maintaining alignment over repeat cycles.
Assembly Stage Positioner
Advance a workpiece into a fixture with the extension-side rubber stopper ensuring repeatable forward placement at every cycle.
FAQ
What does the AS adjuster code mean on this HLQ model?
AS indicates an adjustable rubber stopper fitted on the extension side only. The retraction side uses the standard bumper cushion. This lets you fine-tune the forward end-of-stroke position while retaining the basic bumper on the return stroke.
How fast can this slide table cylinder operate?
Operating speed range is 50-500 mm/s. Use meter-out speed control to stay within this range. Maximum working pressure is 0.7 MPa (100 psi), with an operating range of 0.15-0.7 MPa for bore 16.