Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X10SB
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X10SB is a genuine HLQ slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X10SB
The AirTAC HLQ20X10SB is a double-acting dual-rod slide-table cylinder that pairs an air cylinder with an integrated ball-bearing linear guide. At bore 20 mm and a 10 mm stroke, it provides moderate thrust over a compact travel range. The ball-bearing rail delivers smooth, anti-rust, dust-proof guidance with low deflection, while the dual-rod layout doubles the thrust and a floating joint protects the rods from side torque. The B adjuster equips both ends with shock absorbers for soft end-of-stroke deceleration.
This is a genuine AirTAC part with a standard sintered NdFeB magnet for position sensing; compatible sensor switches are CMSH, DMSH, and EMSH, which seat in the magnetic-switch slots on the body. We confirm thrust, dimensions, allowable load, and moment from the datasheet or on-page spec table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X10SB Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X10SB |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 20 delivers moderate thrust in a compact ball-bearing slide table; step up the bore if more push is needed, but do not exceed 0.7 MPa maximum working pressure (the operating range for bore 20 is 0.15-0.7 MPa, or 22-100 psi). The HLQ ball-bearing guide is ideal for anti-rust, dust-proof environments, while HLS cross-roller offers higher rigidity, HLH miniature roller-ball gives the best straightness with three port groups, and HLF provides a lower body profile. The 10 mm stroke fits within the bore 20 range; confirm your travel requirement against the datasheet. The B adjuster provides shock absorbers at both ends for quieter, gentler stopping - choose AS or AF if you need a rubber stopper on one side only, and select PT, G, or T thread to match your fittings. We verify allowable load, moment, and kinetic energy from the published tables and deflection curves for your application.
Applications
Pick-and-Place Head
Carries a gripper for accurate part placement; shock absorbers at both ends cushion the short 10 mm extension and retraction for smooth stops.
Assembly Stage Positioning
Moves a fixture or workpiece into register with soft end-of-travel deceleration, protecting delicate components during assembly.
Small-Parts Transfer
Shuttles lightweight parts between stations on a production line where the anti-rust dust-proof guide handles shop-floor dust and humidity.
FAQ
What does the B adjuster code mean on this slide table?
B indicates shock absorbers on both the extension and retraction ends, giving soft deceleration at end of stroke. If you only need absorption on one side, choose BS for extension or BF for retraction.
What are the pressure and speed limits for the HLQ20X10SB?
Maximum working pressure is 0.7 MPa. For bore 20 the operating range is 0.15-0.7 MPa (22-100 psi). Control speed with meter-out flow to keep travel at or below 500 mm/s. We confirm allowable load and moment from the datasheet on request.