Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X150SA
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X150SA is a genuine HLQ slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X150SA
The HLQ20X150SA is an AirTAC ball-bearing slide-table cylinder that combines a double-acting dual-rod air cylinder with a linear guide so the table travels straight with minimal deflection. Bore 20 mm and stroke 150 mm deliver higher thrust over a long guided stroke. A floating joint protects the rod from side torque, and the dual rod doubles the thrust. Adjustable rubber stoppers on both ends let you fine-tune end-of-stroke positions on extension and retraction. The ball-bearing guide is anti-rust and dust-proof, suited to clean or washdown environments.
This is a genuine AirTAC part. A magnet is standard for position sensing with CMSH, DMSH, or EMSH switches. We confirm exact thrust, dimensions, and load-moment capacity from the datasheet or on-page spec table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X150SA Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X150SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 20 mm gives higher thrust than smaller bores in the HLQ series, suited when the application needs more push at a moderate operating pressure. The ball-bearing guide is the right choice where anti-rust and dust-proofing matter. Stroke 150 mm must be within the bore 20 available stroke table. The A adjuster adds rubber stoppers on both ends for fine end-position control; choose B for shock absorbers when impact energy is higher (B codes are not available on bore 6). Thread is PT; order G for BSPP or T for NPT. We confirm allowable load, moment, and kinetic energy from the published tables and deflection curves.
Applications
Pick-and-Place Head
Precise guided traverse for a small vacuum pickup moving parts between trays or fixtures with low deflection and repeatable stops.
Small-Parts Transfer
Shifts lightweight components sideways between conveyor lanes with anti-rust ball-bearing guidance and dual-rod stability.
Assembly Stage Stopper
Presents or indexes a workpiece at an assembly station with adjustable rubber end-stops on both extension and retraction.
FAQ
What does the A in HLQ20X150SA mean?
The A code means adjustable rubber stoppers on both ends. AF would be retraction-side only, AS extension-side only. B codes add shock absorbers but are not available on bore 6.
What is the maximum operating pressure for the bore 20 HLQ?
Maximum working pressure is 0.7 MPa. The operating range for bore 20 is 0.15 to 0.7 MPa. Meter-out speed control keeps travel between 50 and 500 mm/s.