Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X150SAS
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X150SAS is a genuine HLQ slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X150SAS
The HLQ20X150SAS is an AirTAC ball-bearing slide-table cylinder that combines a double-acting dual-rod air cylinder with a linear guide so the table travels straight with minimal deflection. Bore 20 mm and stroke 150 mm deliver higher thrust over a long guided stroke. A floating joint protects the rod from side torque, and the dual rod doubles the thrust. An adjustable rubber stopper on the extension side lets you fine-tune the extend end position; the retraction side uses the standard bumper. The ball-bearing guide is anti-rust and dust-proof, suited to clean or washdown environments.
This is a genuine AirTAC part. A magnet is standard for position sensing with CMSH, DMSH, or EMSH switches. We confirm exact thrust, dimensions, and load-moment capacity from the datasheet or on-page spec table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X150SAS Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X150SAS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 20 mm gives higher thrust than smaller bores in the HLQ series, suited when the application needs more push at a moderate operating pressure. The ball-bearing guide is the right choice where anti-rust and dust-proofing matter. Stroke 150 mm must be within the bore 20 available stroke table. The AS adjuster adds a rubber stopper on the extension side only; the retraction side uses the standard bumper. Thread is PT; order G for BSPP or T for NPT. We confirm allowable load, moment, and kinetic energy from the published tables and deflection curves.
Applications
Pick-and-Place Head
Precise guided traverse for a small vacuum pickup where the extend position must be repeatable and fine-tuned for each cycle.
Small-Parts Transfer
Shifts lightweight components sideways between conveyor lanes with anti-rust ball-bearing guidance and an extend-side adjustable stop.
Assembly Stage Present
Presents a workpiece at an assembly station where the extend end position needs fine adjustment while the retract side runs on the standard bumper.
FAQ
What does AS mean in HLQ20X150SAS?
AS means an adjustable rubber stopper on the extension side only. The retraction side uses the standard bumper. Choose AS when you need to fine-tune the extend position but not the retract position.
What sensors work with the HLQ20X150SAS?
A magnet is standard on every HLQ unit. CMSH, DMSH, or EMSH series switches fit the magnetic-switch slots on the body for position detection.