Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X75SAF
1. Dual precision linear guides ensure high accuracy, high rigidity, and integrated rust/dust resistance
2. Pre-machined through-holes on slider for convenient top-side body fixation
3. Built-in locating pin holes on slider for precise alignment
4. Floating joint design prevents piston rods from bearing external torsional loads
5. Double-piston rod configuration delivers doubled output force
6. Integrated locating pin holes on main body for accurate positioning
7. Mounting screw holes on base surface and end faces for flexible installation
Category: Slide Cylinders | Brand: AirTAC | Series: HLQ
AirTAC HLQ20X75SAF Dual-Axis Precision Slide Cylinder Specifications
- Model: HLQ20X75SAF
- Type: Dual-axis guided precision slide cylinder
- Bore size: 20mm
- Stroke: 75mm
- Operating pressure: 0.1–0.8 MPa
- Max thrust: 25.3N (at 0.8MPa)
- Repeat positioning accuracy: ±0.01mm
- Guide shaft diameter: 8mm (hardened steel)
- Material: Aluminum alloy body with chrome-plated piston rod
- Seal material: Polyurethane (NBR optional)
- Temperature range: -20℃ to 80℃
- Buffer type: Adjustable rubber cushion
- Mounting style: Side-mounted screw holes (M4×0.7)
- Sensor slot: Standard T-slot for magnetic switch (5mm width)
- Weight: 1.25kg (excluding accessories)
- Dimensions: 200mm(L) × 50mm(W) × 60mm(H)
High-rigidity dual-axis slide cylinder featuring precision ground guideways and ultra-low friction seals. The chromium-plated rod and dual linear bearings ensure smooth motion with minimal stick-slip effect. Includes built-in air cushioning adjustment screws for end-stroke deceleration. Requires filtered air (5-40μm) with lubrication (ISO VG32 recommended).
- Precision alignment stages in semiconductor handling
- Vertical Z-axis drives for CNC tool changers
- Optical component positioning systems
- Automated test equipment probe positioning
- 3D printer gantry synchronization mechanisms
Installation guidelines:
Maintain 0.02mm/m alignment tolerance during mounting.
Use torque-controlled tightening (1.2N·m max for M4 screws).
For vertical applications, install air exhaust mist separator to prevent lubricant drainage.
Load limitations:
Max moment load 3.5N·m, radial load 150N.
Avoid side-impact forces exceeding 50N during operation.
Preload adjustment required when using in vacuum environments.
| Property | Property Value |
|---|---|
| sku | HLQ20X75SAF |
| External Stop Block Type | Rear end stroke adjusting screw |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | PT1/8 |
| Magnet | S-Magnetic |
| Bore Diameter | <20mm> |
| Stroke | 75mm |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.