Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X75SAS
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X75SAS is a genuine HLQ slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X75SAS
The AirTAC HLQ20X75SAS is a double-acting dual-rod slide-table cylinder combining a ball-bearing linear guide with an integrated air cylinder. The 20 mm bore and 75 mm stroke produce moderate thrust through the dual rods, and the floating joint isolates the rod from side torque. The ball-bearing guide offers anti-rust, dust-proof performance with smooth, precise straight-line movement.
This is a genuine AirTAC part with a standard magnet fitted for position detection. Sensor switches from the CMSH, DMSH, and EMSH series mount in the body slots. We verify exact thrust, dimensions, load, and moment figures from the datasheet or on-page specification table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X75SAS Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X75SAS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
A 20 mm bore provides higher thrust than smaller HLQ bores, fitting mid-range guided-motion tasks. The HLQ ball-bearing guide is the right choice when anti-rust and dust-proof operation matter. The 75 mm stroke must fall within the bore 20 stroke table. This model carries an adjustable rubber stopper on the extension side only (AS adjuster), so you can fine-tune the rod-out end position while the retraction end uses the standard bumper cushion. Ports use PT thread.
For allowable load, moment, and kinetic energy, we reference the published Wmax, Emax, and deflection curves. Contact us to confirm sizing for your application.
Applications
Gripper Traverse Slide
Moves a gripper 75 mm outward to pick parts then retracts, with an extension-side rubber stopper for repeatable reach.
Parts Push-Off Station
Pushes small parts off a conveyor line using dust-proof ball-bearing guidance suited to gritty environments.
Sorting Diverter Stage
Diverts items between lanes with anti-rust guide surfaces that tolerate humid sorting-floor conditions.
FAQ
What does the AS adjuster code mean on this HLQ20X75SAS?
AS indicates an adjustable rubber stopper on the extension side only. The retraction end uses the standard bumper cushion. This lets you fine-tune the rod-out end position without adding a shock absorber.
How do I confirm the allowable load and moment for this model?
We reference the published Wmax, Emax, and moment tables along with the deflection curves from the AirTAC datasheet. Contact us with your load and mounting details and we will confirm whether this model fits your application.