Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X125SAF
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X125SAF is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X125SAF
The HLQ25X125SAF is a genuine AirTAC double-acting dual-rod slide-table cylinder that integrates a ball-bearing linear guide with an air cylinder, so the moving table travels straight with low deflection. The dual-rod design doubles the thrust for a bore 25 body, and a floating joint spares the rods from side torque. The HLQ ball-bearing guide is anti-rust and dust-proof, and bore 25 uses a double-rail layout for rigidity. An adjustable rubber stopper is fitted on the retraction side (AF) for fine end-position control.
A magnet is standard on every HLQ unit, enabling position sensing with CMSH, DMSH, or EMSH switches in the body slots. We confirm the exact thrust, dimensions, and load-moment values for this model from the AirTAC datasheet or on-page spec table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X125SAF Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X125SAF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 25 is the largest in the HLQ family, offering the highest push and pull in this ball-bearing range; choose it when you need more thrust than a smaller bore provides. Stroke 125 mm sits within the bore 25 stroke table. The HLQ ball-bearing guide suits clean, dust-sensitive, or mildly corrosive environments where cross-roller precision is not required. The AF adjuster gives an adjustable rubber stopper on the retraction side only - pair it with a separate extension-side stopper if both ends need cushioning. Thread is PT (tapered). For allowable load, moment, and kinetic energy, we route sizing to the published Wmax, Emax, and moment tables and deflection curves.
Applications
Precision Pick-and-Place
Ball-bearing guided slide for repeatable pick-and-place of components where dust-proof operation and anti-rust construction protect the guide over long strokes.
Small-Parts Transfer
Bore 25 dual-rod thrust moves a transfer shuttle along a 125 mm stroke with straight, low-deflection travel on a double-rail ball-bearing table.
Gripper Traverse Stage
Mount a gripper on the table face for a stable traverse that holds positioning accuracy even with a side-loaded end effector at full extension.
FAQ
What does the AF adjuster code mean on this HLQ25 slide table?
AF indicates an adjustable rubber stopper fitted on the retraction side only. The extension side uses the standard bumper. If you need stopper or shock-absorber control on both ends, select the A or B variant respectively (B-type shock absorbers are available on bore 25).
What is the maximum operating pressure for the HLQ25X125SAF?
Maximum working pressure is 0.7 MPa (100 psi). For bore 25 the operating range is 0.15-0.7 MPa (22-100 psi). Proof pressure is 1.2 MPa (175 psi). Meter-out speed control keeps travel within 50-500 mm/s; load and moment capacity are confirmed from the datasheet tables on request.