Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X125SAS
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X125SAS is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X125SAS
The HLQ25X125SAS is a genuine AirTAC double-acting dual-rod slide-table cylinder that pairs a ball-bearing linear guide with an air cylinder, delivering straight, low-deflection table travel. The dual rods double the thrust for a bore 25 body, and the floating joint isolates the rods from side torque. HLQ ball-bearing guides are anti-rust and dust-proof; bore 25 uses a double-rail layout for stability. An adjustable rubber stopper is fitted on the extension side (AS) for controlled forward end-positioning.
A magnet is standard on every HLQ unit, supporting position sensing with CMSH, DMSH, or EMSH switches in the body slots. We confirm the exact thrust, dimensions, and load-moment values from the AirTAC datasheet or on-page spec table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X125SAS Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X125SAS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 25 provides the highest thrust in the HLQ ball-bearing range; select it when your application needs more push or pull than smaller bores offer. Stroke 125 mm is within the bore 25 stroke table. The HLQ guide suits environments where dust-proofing and anti-rust properties matter more than cross-roller-class precision. The AS adjuster places an adjustable rubber stopper on the extension side only; combine with a separate retraction-side stopper if both ends need control. Thread is PT (tapered). Allowable load, moment, and kinetic energy are published as tables and deflection curves - contact us for sizing.
Applications
Assembly Stage Traverse
Ball-bearing double-rail table provides smooth 125 mm traverse for an assembly fixture, with the AS extension-side rubber stopper giving a controlled forward landing.
Stopper Push-Off
Dual-rod bore 25 thrust pushes a queued workpiece off a stopper location with dust-proof guided travel that resists contamination in a production line.
Indexing Shuttle
Mount a part nest on the table for repeatable indexing along a 125 mm stroke; the floating joint protects the rods when the nest carries an offset load.
FAQ
What is the difference between AS and AF adjuster codes?
AS places an adjustable rubber stopper on the extension (forward) side; AF places it on the retraction (return) side. Both are rubber-stopper variants. If you need shock absorbers instead, choose a B, BS, or BF variant (available on bore 25). A basic unit with no adjuster code uses standard bumpers on both ends.
Is the magnet optional on the HLQ25X125SAS?
No - the magnet is standard on every HLQ slide table (the S in the code). Position sensing is done with CMSH, DMSH, or EMSH switches fitted into the magnetic-switch slots on the body. You cannot order this line without a magnet.