Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X125SB
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X125SB is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X125SB
The HLQ25X125SB is a genuine AirTAC double-acting dual-rod slide-table cylinder that integrates a ball-bearing linear guide with an air cylinder for straight, low-deflection table travel. The dual rods double the thrust for a bore 25 body, and the floating joint protects the rods from side torque. HLQ ball-bearing guides are anti-rust and dust-proof, and bore 25 uses a double-rail layout. The B adjuster equips both ends with shock absorbers for smooth deceleration at higher travel speeds.
A magnet is standard on every HLQ unit, enabling position sensing with CMSH, DMSH, or EMSH switches in the body slots. We confirm the exact thrust, dimensions, and load-moment values from the AirTAC datasheet or on-page spec table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X125SB Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X125SB |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 25 gives the highest thrust in the HLQ ball-bearing family; choose it when more push or pull is needed than smaller bores provide. Stroke 125 mm falls within the bore 25 stroke table. The HLQ guide is ideal for dust-sensitive or mildly corrosive settings where cross-roller precision is not required. The B adjuster adds shock absorbers on both extension and retraction ends, recommended when the slide runs at higher speeds and needs controlled deceleration beyond what a rubber stopper offers. B-type shock absorbers are available on bore 25 (they are not offered on bore 6). Thread is PT (tapered). For load, moment, and kinetic energy sizing, we use the published Wmax, Emax, and moment tables and deflection curves.
Applications
High-Speed Pick-and-Place
Ball-bearing guided table with dual shock absorbers handles fast pick-and-place over 125 mm, decelerating smoothly at both ends to protect the workpiece.
Parts Transfer Shuttle
Bore 25 dual-rod thrust drives a transfer shuttle along a 125 mm stroke with dust-proof, anti-rust ball-bearing guidance for reliable conveyor-side operation.
Adjustable Stopper Stage
Shock-absorber end stops on both sides let you fine-tune deceleration for a staged assembly or test fixture that cycles repeatedly without bounce.
FAQ
What does the B adjuster code mean and when should I choose it?
B means shock absorbers are fitted on both extension and retraction ends. Choose B when the slide runs at higher speeds and needs gentler deceleration than a rubber stopper provides. B-type shock absorbers are available on bore 25 but are not offered on bore 6. If you only need a stopper on one end, select BS (extension) or BF (retraction).
How fast can the HLQ25X125SB travel and what limits it?
Speed range is 50-500 mm/s, controlled with meter-out flow controls. Maximum working pressure is 0.7 MPa (100 psi) with an operating range of 0.15-0.7 MPa for bore 25. Allowable load, moment, and kinetic energy depend on the guide capacity; we confirm these from the published datasheet tables and deflection curves on request.