Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL12X50SB
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL12X50SB is a genuine HLQ slide-table cylinder, 12 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 85 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore12 mm
- Push thrust @0.5 MPa85 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL12X50SB
The HLQL is AirTAC's symmetrical ball-bearing slide-table cylinder: a double-acting dual-rod air cylinder integrated with a linear ball guide so the moving table travels straight with low deflection. The ball-bearing guide is anti-rust and dust-proof, well suited to clean or washdown environments. The dual rod doubles the thrust while a floating joint spares the rod from side torque. With a 12 mm bore and 50 mm stroke, this model provides moderate thrust for precise guided motion.
This is a genuine AirTAC part. The magnet is standard, and sensor switches CMSH, DMSH, or EMSH mount in the magnetic-switch slots on the body. We confirm exact thrust, dimensions, and allowable load and moment from the AirTAC datasheet or the on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL12X50SB Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL12X50SB |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 12 mm |
| Push thrust @0.5 MPa | 85 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Select the bore for the thrust you need: a bigger bore gives more push. The 12 mm bore here suits moderate-thrust applications where the anti-rust, dust-proof ball-bearing guide is preferred over a cross-roller (HLS) type. The 50 mm stroke must fall within the bore's published stroke range. The adjuster code B means shock absorbers at both travel ends, cushioning impact more effectively than a basic bumper. For load and moment sizing we reference the published AirTAC tables and deflection curves -- contact us with your application details.
Applications
SMD Pick-and-Place
Ball-bearing guided traverse for a pick-and-place head placing surface-mount components with the dust-proof precision this sub-family provides.
Small-Parts Transfer
Transfers small electronic or medical parts between conveyor stations where anti-rust guide rails and clean travel matter.
Gripper Traverse
Mounts a gripper for precise linear traverse in an assembly cell, the dual rod delivering balanced moderate thrust on both ends.
FAQ
What does the SB adjuster code mean on this model?
After the magnet indicator S, the letter B means shock absorbers are fitted at both ends of the stroke. BS would place them on the extension side only and BF on the retraction side only. B-type adjusters are not offered on bore 6.
What is the maximum operating pressure and speed?
Maximum working pressure is 0.7 MPa (100 psi). Bore 12 operates from 0.15 to 0.7 MPa (22-100 psi). Meter-out speed control keeps travel at or below 500 mm/s. We confirm allowable load and moment from the published datasheet tables.