Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL16X30SA
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL16X30SA is a genuine HLQ slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL16X30SA
A slide-table cylinder integrates an air cylinder with a linear ball-bearing guide so the moving table travels straight. The HLQL16X30SA is a symmetrical ball-bearing slide table with a 16 mm bore and 30 mm stroke. The dual-rod double-acting design doubles thrust while a floating joint protects the rods from side torque. The ball-bearing guide offers anti-rust, dust-proof performance with precise guided travel and low deflection. Adjustable rubber stoppers on both ends let you fine-tune end-of-stroke positioning.
This is a genuine AirTAC part. A magnet is standard for position sensing, with sensor switches in the CMSH, DMSH, and EMSH series fitting the body slots. We confirm thrust, dimensions, and allowable load-moment from the AirTAC datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL16X30SA Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL16X30SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 16 suits applications needing moderate thrust from a compact body; a larger bore gives more push, so match the bore to your load using the thrust table. The HLQL ball-bearing guide is the anti-rust, dust-proof choice over the cross-roller HLS or the low-height HLF - choose it when corrosion resistance and dust protection matter. Stroke 30 mm sits within the bore 16 range. This model carries adjustable rubber stoppers on both ends (adjuster code A) for controlled end-of-stroke positioning. Thread is PT. Route load and moment sizing to the published Wmax/Emax and deflection tables.
Applications
Pick-and-Place Head
Mount a vacuum or mechanical gripper on the table for precise component placement on PCBs or small assemblies.
Small-Parts Transfer
Shuttle parts between processing stations with straight, low-deflection travel guided by the ball-bearing rail.
Assembly Stage Slide
Position a workpiece or tooling at an assembly station where dust-proof, anti-rust operation keeps motion clean.
FAQ
What does the adjuster code A mean on HLQL16X30SA?
Adjuster code A means adjustable rubber stoppers are fitted on both the extension and retraction ends, giving you cushioned end-of-stroke positioning on both sides. If you only need stopping on one side, AS covers the extension end and AF the retraction end.
What is the maximum working pressure for this slide table?
Maximum working pressure is 0.7 MPa (100 psi). The operating range for bore 16 is 0.15 to 0.7 MPa (22 to 100 psi). Speed should be metered to 50 to 500 mm/s.