Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL16X50SA
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL16X50SA is a genuine HLQ slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL16X50SA
The HLQL16X50SA is a symmetrical ball-bearing slide table cylinder with a 16mm bore and 50mm stroke. As a double-acting dual-rod guided cylinder, it integrates an air cylinder with a linear ball-bearing guide so the table travels straight with minimal deflection. The dual rod doubles thrust while a floating joint protects the rod from side torque. The ball-bearing guide is anti-rust and dust-proof, and the symmetrical body supports mounting from either side.
This is a genuine AirTAC part with a standard magnet for position sensing. Compatible sensor switches include the CMSH, DMSH, and EMSH series, which fit the magnetic-switch slots on the body. We confirm thrust, dimensions, and load-moment values from the datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL16X50SA Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL16X50SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
The 16mm bore provides moderate thrust for medium-duty guided tasks. Choose the HLQL ball-bearing guide when anti-rust and dust-proof properties are priorities. The 50mm stroke is within the standard range for this bore. The A adjuster code means adjustable rubber stoppers are fitted at both ends for fine end-position control. Thread is PT. Load and moment sizing should be confirmed from the published tables and deflection curves - contact us for assistance.
Applications
Pick-and-place transfer
Ball-bearing guided straight travel for precise part handling with adjustable rubber stoppers at both ends for repeatable positioning.
Small-parts transfer
Moving components between stations with a dust-proof anti-rust guide and fine-tuned stop positions on extension and retraction.
Assembly stage positioning
Repeatable guided slide for assembly operations where adjustable end stops ensure consistent workpiece placement over 50mm.
FAQ
What does the A adjuster code mean on this slide table?
A indicates adjustable rubber stoppers fitted at both ends of the slide table. This allows fine-tuning of the end positions on both extension and retraction without the energy absorption of a shock absorber. It is available on this 16mm bore.
Is the magnet optional on this cylinder?
No, the magnet is standard on all HLQL slide table cylinders. The S in the model code confirms a magnet is fitted. Compatible sensor switches are CMSH, DMSH, and EMSH, which mount in the slots on the cylinder body.