Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X30SBS
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X30SBS is a genuine HLQ slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X30SBS
The HLQL20X30SBS is a symmetrical ball-bearing slide-table cylinder that integrates an air cylinder with a linear guide for precise, low-deflection travel. Dual rods double the thrust and a floating joint isolates the rods from side torque. Bore 20 with 30 mm stroke provides higher thrust for a bigger bore. The ball-bearing guide offers anti-rust and dust-proof operation. The BS adjuster fits a shock absorber on the extension side only, absorbing impact where the table drives the workpiece forward.
This is a genuine AirTAC part. A magnet is standard, and the body has slots for CMSH, DMSH, or EMSH sensor switches. We confirm thrust, dimensions, and load-moment from the AirTAC datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X30SBS Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X30SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 20 is selected for higher push and pull force. The HLQL ball-bearing guide suits anti-rust and dust-proof duty. Stroke 30 mm falls within the bore 20 stroke table. The BS adjuster code places a shock absorber on the extension side only, appropriate when the forward stroke carries the heaviest load. Thread is PT. Load, moment, and deflection sizing should be routed to us using the published Wmax, Emax, and deflection curves.
Applications
Indexing Slide
Indexes a fixture forward into a machining or inspection position; the extension-side shock absorber cushions the forward stop under payload in dusty environments.
Component Shuttle
Shuttles electronic components between stations with the anti-rust ball-bearing guide maintaining repeatability and the symmetrical body balancing the load.
Alignment Pusher
Pushes a workpiece against an alignment stop; the dual-rod ball-bearing table keeps the push face square and deflection minimal over the 30 mm stroke.
FAQ
What does the BS adjuster code mean on HLQL20X30SBS?
BS means a shock absorber is fitted on the extension side only. This cushions the forward stroke where the workpiece is driven into position. The retraction end uses a standard bumper.
Is the magnet optional on this slide table?
No. The magnet is standard on every HLQL unit and cannot be declined. The S in the model code confirms it is fitted. Sensor switches CMSH, DMSH, or EMSH mount in the body slots for position detection.