Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X50SAF
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X50SAF is a genuine HLQ slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X50SAF
The AirTAC HLQL20X50SAF is a genuine double-acting dual-rod slide-table cylinder with an integrated linear ball-bearing guide. The bore 20 body delivers higher thrust for a bigger bore, and the symmetrical design lets you mount the unit either way. A floating joint spares the rod from side torque so the moving table travels straight with low deflection.
This is a genuine AirTAC part with a standard magnet for position sensing. Compatible sensor switches include CMSH, DMSH, and EMSH series, which fit the magnetic-switch slots on the body. We confirm exact thrust, dimensions, and allowable load-moment from the AirTAC datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X50SAF Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X50SAF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 20 suits applications needing higher thrust than smaller bores. The HLQL ball-bearing guide is anti-rust and dust-proof, making it a strong pick for clean or mildly corrosive environments. Stroke 50 falls within the bore 20 range. The AF adjuster adds an adjustable rubber stopper on the retraction side only; the extension side uses the standard bumper. Thread is PT (tapered). For load and moment sizing we reference the published Wmax, Emax, and moment tables along with deflection curves.
Applications
Pick-and-Place Head
Mounts a vacuum gripper for precise vertical pick-and-place of small electronic parts on a PCB assembly line.
Small-Parts Transfer
Transfers lightweight workpieces between conveyor stations with dust-proof ball-bearing guidance for repeatable positioning.
Gripper Traverse
Shuttles a parallel gripper sideways between two fixture positions on a symmetrical dual-rail body for mirrored tooling access.
FAQ
What does the AF adjuster mean on HLQL20X50SAF?
AF indicates an adjustable rubber stopper on the retraction side only. The extension side uses the standard bumper cushion. If you need shock absorbers instead, look for B-type adjusters such as BS or BF.
What is the maximum operating pressure and speed range?
Maximum working pressure is 0.7 MPa (100 psi). For bore 20 the operating range is 0.15-0.7 MPa (22-100 psi). Use meter-out speed control to keep travel between 50 and 500 mm/s.