Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X100SBS
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X100SBS is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X100SBS
The AirTAC HLQL25X100SBS is a symmetrical ball-bearing slide-table cylinder with a 25 mm bore and 100 mm stroke. It integrates an air cylinder with a linear ball-bearing guide so the table travels straight with minimal deflection. The dual-rod design doubles thrust, and a floating joint protects the rods from side torque. The ball-bearing guide is anti-rust and dust-proof, suited to clean environments. The BS adjuster adds shock absorbers on the extension side for smoother end-of-stroke deceleration over the long 100 mm travel.
This is a genuine AirTAC part with a standard magnet for position sensing via CMSH, DMSH, or EMSH switches. Thrust, dimensions, and load-moment values are confirmed from the AirTAC datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X100SBS Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X100SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose the 25 mm bore when you need higher thrust than smaller bores offer; the exact thrust for this model appears in the on-page spec table. The HLQL ball-bearing guide suits environments where anti-rust and dust-proof operation matter, versus the cross-roller HLS for maximum rigidity. The 100 mm stroke fits longer-travel transfer tasks. The BS adjuster places shock absorbers on the extension side for smooth deceleration; choose thread PT, G, or NPT per your fittings. We confirm allowable load and moment from the published AirTAC tables and deflection curves.
Applications
Long-Stroke Pick-and-Place
Guides parts over a 100 mm travel with precise positioning at both ends, the shock absorber cushioning the extension stop for smooth placement.
Transfer Line Divert
Moves small components across a conveyor lane with the ball-bearing guide maintaining straightness and the symmetrical body fitting mirrored layouts.
Gripper Traverse
Carries a gripper along a 100 mm path with low deflection, the dual rods keeping the payload steady during lateral moves.
FAQ
What does the BS adjuster code mean on the HLQL25X100SBS?
BS indicates shock absorbers on the extension side. This cushions the forward end-of-stroke over the 100 mm travel for smoother deceleration. The retraction side uses a standard bumper.
What is the maximum operating pressure for this slide table?
The maximum working pressure is 0.7 MPa (100 psi). For the 25 mm bore the operating range is 0.15 to 0.7 MPa. Meter-out speed control keeps travel between 50 and 500 mm/s.