Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X20S
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X20S is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X20S
The AirTAC HLQL25X20S is a symmetrical ball-bearing slide-table cylinder with a 25 mm bore and 20 mm stroke. It pairs an air cylinder with a double-rail linear ball guide so the table moves straight with low deflection. The dual-rod design doubles thrust, and the floating joint shields the rods from side torque. Ball-bearing guides are anti-rust and dust-proof for clean or wash-down service.
This is a genuine AirTAC part with a standard sintered NdFeB magnet for position sensing using CMSH, DMSH, or EMSH switches in the body slots. Basic bumper cushioning is fitted at both ends. We confirm exact thrust, dimensions, and allowable load-moment from the datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X20S Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X20S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 25 provides higher thrust than smaller bores in the HLQL ball-bearing range. Pick the ball-bearing guide for anti-rust, dust-proof service with smooth travel; the symmetrical body balances loads around center. The 20 mm short stroke suits compact pick-and-place movements. Basic bumper cushioning is adequate for low-impact short-stroke duty. Thread is PT. We route load, moment, and deflection sizing to the published datasheet tables and curves.
Applications
Short-Stroke Stopper
Acts as a compact end stop for small parts on a feed rail, with the 20 mm stroke providing just enough travel to clear the part path.
Gripper Traverse
Shifts a parallel gripper 20 mm between open and closed tool positions on a pick-and-place head, guided by the symmetrical ball rail.
Clamp Actuation
Drives a short-stroke clamping jaw against a workpiece with dual-rod thrust and ball-bearing straightness for repeatable grip.
FAQ
Why choose the symmetrical HLQL ball-bearing guide over an HLS cross-roller guide?
HLQL uses a ball-bearing linear guide that is anti-rust and dust-proof, ideal for clean or wash-down environments. HLS uses a cross-roller guide for maximum rigidity and load capacity. Both are genuine AirTAC dual-rod slide tables.
Can I adjust the end-of-stroke stopping force on this basic-cushion model?
The basic-cushion HLQL25X20S has bumper cushioning only. For adjustable rubber stoppers choose an A-type adjuster (A, AS, or AF), or for shock absorbers choose a B-type (B, BS, or BF). We can confirm which adjuster fits your stroke.