Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X40SBF
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X40SBF is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X40SBF
The HLQL25X40SBF is a symmetrical double-acting dual-rod slide-table cylinder that integrates an AirTAC ball-bearing linear guide with an air cylinder for straight, precise travel. The dual rod doubles thrust and a floating joint prevents side torque from reaching the rods. At bore 25mm and stroke 40mm this model provides higher thrust for heavier guided loads, and the ball-bearing guide offers anti-rust, dust-proof operation. The BF adjuster places a shock absorber on the retraction side for controlled end-of-stroke deceleration on the return stroke.
This is a genuine AirTAC part with a standard sintered NdFeB magnet for position sensing using CMSH, DMSH or EMSH sensor switches in the body slots. We verify thrust, dimensions, allowable load and moment from the published datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X40SBF Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X40SBF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose bore 25mm when your load requires higher guided thrust; the exact push and pull forces are in the spec table for accurate matching. The HLQL ball-bearing guide is ideal where anti-rust and dust-proof operation are valued, and the symmetrical body allows balanced mounting. Stroke 40mm is within the bore 25 range.
The BF adjuster adds a shock absorber on the retraction side only - select it when the return stroke carries more kinetic energy or moving mass than the extension stroke. Thread is PT standard; G or T options are available. We can provide the Wmax, Emax and moment tables and deflection curves to support your load sizing.
Applications
Return-Stroke Stop
Positions a tool on retraction with shock-absorber cushioning, absorbing return energy when a heavier tool head retracts.
Parts Diverter
Diverts small parts between conveyor paths with precise ball-bearing guidance and dust-proof operation in mildly harsh settings.
Assembly Stage Index
Indexes a workpiece fixture into position with dual-rod thrust and controlled retraction via the retraction-side shock absorber.
FAQ
What is the difference between BF and B adjusters?
BF places a shock absorber on the retraction side only, while B fits shock absorbers at both ends. Choose BF when only the return stroke needs cushioning; choose B when both extension and retraction carry significant kinetic energy.
Where can I find the allowable load and moment for this model?
AirTAC publishes allowable load, moment and kinetic energy as Wmax, Emax and moment tables plus deflection curves. We can pull these from the datasheet for your specific bore, stroke and guide configuration on request.