Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X50SA
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X50SA is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X50SA
A slide-table cylinder combines an air cylinder and a linear guide so the moving table tracks a precise straight line. The HLQL25X50SA is a symmetrical ball-bearing guided slide table with a 25 mm bore and 50 mm stroke. Its dual-rod double-acting design doubles the thrust, and a floating joint keeps side torque off the rod. The ball-bearing guide is anti-rust and dust-proof, a good match for clean-room or washdown duty.
This is a genuine AirTAC part. The magnet is standard on every unit, and the body has slots for CMSH, DMSH, or EMSH sensor switches. We confirm thrust, dimensions, and allowable load or moment from the datasheet or on-page table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X50SA Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X50SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Pick the 25 mm bore when you need higher thrust in a compact envelope; a larger bore adds push without altering the stroke. The HLQL ball-bearing guide is the choice where anti-rust and dust-proof operation are priorities - the double-rail layout covers bore 12 through 25. This model carries an adjustable rubber stopper at both ends (code A) for tunable end-of-stroke cushioning. Thread is PT and the port size is 1/8 inch.
Verify the stroke is within the bore's published range, and let us handle load, moment, and deflection sizing. Those values are published as tables and curves, and we confirm them for your specific setup.
Applications
Pick-and-Place Traverse
Move a suction nozzle 50 mm to pick glass microscope slides from a stack and place them onto a coating fixture with repeatable precision.
Stopper Gate Slide
Extend a flat stop 50 mm into a conveyor lane to arrest anodized aluminum brackets before a robotic arm unloads them at a packing station.
Small-Parts Transfer Stage
Transfer small pneumatic valve bodies 50 mm from a vibratory feeder to an assembly nest using the rubber stopper for gentle end-of-travel cushioning.
FAQ
What does the A adjuster code mean on the HLQL25X50SA?
The A code indicates an adjustable rubber stopper fitted at both ends of the stroke. You can tune the stopper position to fine-tune end-of-stroke cushioning. If you need heavier shock absorption instead, a B-type shock-absorber variant is available on this 25 mm bore (though not on bore 6).
Is the magnet optional on this slide table?
No. The magnet is standard on every HLQL unit - the S in the model code denotes a magnet-fitted cylinder. You can fit CMSH, DMSH, or EMSH sensor switches in the body slots for position detection.