Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X50SAF
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X50SAF is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X50SAF
The AirTAC HLQL25X50SAF is a symmetrical ball-bearing slide-table cylinder with a 25 mm bore and 50 mm stroke. As a double-acting dual-rod unit, it integrates an air cylinder with a linear ball guide so the moving table travels straight with low deflection. The dual rods double the thrust, and the floating joint protects the rods from side torque. The HLQL ball-bearing guide offers anti-rust and dust-proof operation, and the symmetrical body suits compact or mirrored mounting layouts. An adjustable rubber stopper on the retraction side lets you fine-tune the return end-of-stroke position.
This is a genuine AirTAC part. A magnet is standard for position sensing with CMSH, DMSH, or EMSH switches fitted to the body slots. We confirm exact thrust, dimensions, and allowable load-moment values from the AirTAC datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X50SAF Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X50SAF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 25 gives higher thrust for larger workpieces or heavier guided loads; step down to a smaller bore if you only need light push. The HLQL ball-bearing guide suits clean, low-friction environments where anti-rust and dust-proof performance matter more than the maximum rigidity of a cross-roller HLS unit. Confirm your required travel against the datasheet stroke table for bore 25. The AF adjuster adds a rubber stopper on the retraction side for softer, adjustable return cushioning. Thread is PT; request G or NPT if your fittings differ. We route load, moment, and deflection sizing to the published tables and curves on request.
Applications
Pick-and-Place Head
Traverses a gripper between stations with straight, low-deflection ball-guided travel and symmetrical mounting for tight cell layouts.
Small-Parts Transfer
Moves components laterally across a conveyor with dust-proof ball bearings and a retraction-side rubber stopper for consistent return position.
Assembly Stage Index
Positions a sub-assembly to a repeatable stop, using dual-rod thrust and a floating joint to keep side loads off the rods.
FAQ
What does the AF adjuster code mean on this HLQL model?
AF indicates an adjustable rubber stopper fitted on the retraction side only, so you can soften and fine-tune the return end-of-stroke. It is not a shock absorber; choose B, BS, or BF for shock-absorber cushioning.
What is the maximum working pressure for the bore 25 HLQL slide table?
The maximum working pressure is 0.7 MPa (100 psi). Operating pressure for bore 25 is 0.15-0.7 MPa (22-100 psi). Proof pressure is 1.2 MPa (175 psi). Never operate above 0.7 MPa.