Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X50SB
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X50SB is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X50SB
The AirTAC HLQL25X50SB is a symmetrical ball-bearing slide-table cylinder with a 25 mm bore and 50 mm stroke. As a double-acting dual-rod unit, it integrates an air cylinder with a linear ball guide so the table travels straight with low deflection. The dual rods double the thrust, and the floating joint keeps side torque off the rods. The HLQL ball-bearing guide delivers anti-rust and dust-proof operation, and the symmetrical body suits compact or mirrored mounting. Shock absorbers on both ends provide smooth, controlled deceleration for heavier moving masses.
This is a genuine AirTAC part. A magnet is standard for position sensing with CMSH, DMSH, or EMSH switches fitted to the body slots. We confirm exact thrust, dimensions, and allowable load-moment values from the AirTAC datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X50SB Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X50SB |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 25 offers higher thrust for larger workpieces or heavier guided loads; select a smaller bore when light push is enough. The HLQL ball-bearing guide fits clean, low-friction environments where anti-rust and dust-proof performance matter more than the top rigidity of a cross-roller HLS unit. Confirm your required travel against the datasheet stroke table for bore 25. The B adjuster adds shock absorbers on both ends for controlled deceleration of heavier masses; note that B-type adjusters are not available on bore 6 but are fine on bore 25. Thread is PT; request G or NPT if your fittings differ. We route load, moment, and deflection sizing to the published tables and curves on request.
Applications
Component Shift Slide
Transfers heavier components between parallel conveyors with dual shock absorbers for smooth stop at both ends and dust-proof ball guidance.
Calibration Slide
Positions a sensor or probe to a repeatable stop with ball-bearing straightness and shock-absorber deceleration protecting delicate payloads.
Test Fixture Positioning
Moves a test fixture into contact with controlled travel, using the symmetrical body and dual-rod thrust for stable, torque-free actuation.
FAQ
What does the B adjuster code mean on this HLQL model?
B means shock absorbers are fitted on both the extension and retraction ends for smooth, controlled deceleration. This suits heavier moving masses where a rubber stopper alone would rebound. B-type adjusters are available on bore 25 but not on bore 6.
How fast can the HLQL25X50SB travel, and what limits speed?
Standard speed range is 50-500 mm/s. Use meter-out speed control to keep speed within this range, and never exceed 0.7 MPa working pressure. We confirm allowable load, moment, and deflection from the published datasheet tables and curves on request.