Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL8X75SA
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL8X75SA is a genuine HLQ slide-table cylinder, 8 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 38 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore8 mm
- Push thrust @0.5 MPa38 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL8X75SA
The AirTAC HLQL8X75SA is a symmetrical ball-bearing slide-table cylinder with an 8 mm bore and 75 mm stroke. An integrated ball guide ensures straight travel with low deflection, the dual-rod design doubles thrust, and a floating joint protects the rods from side torque. The symmetrical body mounts from either side.
Genuine AirTAC part with a standard magnet and magnetic-switch slots on the body. Compatible sensors are CMSH, DMSH, or EMSH. We confirm thrust, dimensions, and load-moment from the datasheet or on-page table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL8X75SA Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL8X75SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 8 mm |
| Push thrust @0.5 MPa | 38 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 8 gives light thrust; move to a larger bore for more push. The HLQL ball-bearing guide is anti-rust and dust-proof for cleaner environments, and the symmetrical body suits compact layouts. This model carries the A adjuster code: adjustable rubber stoppers at both ends for fine end-position tuning. Thread is PT. We verify load and moment from the published tables and curves.
Applications
Precision Stopper Position
Adjustable rubber stoppers let you fine-tune end positions for repeatable part placement.
Small-Parts Transfer
Moves lightweight workpieces between stations along the guided ball-rail with low deflection.
End-Stop Calibration Stage
Tunes travel end points for test fixtures or calibration rigs needing repeatable stops.
FAQ
What does the A adjuster code mean on this HLQL8 model?
The A code adds adjustable rubber stoppers at both ends, letting you fine-tune the end positions without adding shock absorbers. It is available on all bores including 6.
What speed range is recommended for this bore 8 slide table?
Keep travel speed between 50 and 500 mm/s using meter-out flow controls. Maximum operating pressure is 0.7 MPa (100 psi); bore 8 range is 0.2 to 0.7 MPa (29-100 psi).