Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL8X75SBF
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL8X75SBF is a genuine HLQ slide-table cylinder, 8 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 38 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore8 mm
- Push thrust @0.5 MPa38 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL8X75SBF
The HLQL8X75SBF is a genuine AirTAC HLQL series ball-bearing guided slide-table cylinder with a symmetrical body design. A double-acting dual-rod air cylinder is integrated with a linear ball-bearing guide so the moving table travels straight with minimal deflection. The 8 mm bore at 75 mm stroke delivers light thrust suitable for small-part handling, and the floating joint spares the rods from side torque. The ball-bearing guide is anti-rust and dust-proof, making it well suited to clean environments.
This part ships with a standard magnet for position sensing; compatible sensor switches are CMSH, DMSH, or EMSH series fitted into the magnetic-switch slots on the body. We confirm the exact thrust, dimensions, and allowable load and moment values from the AirTAC datasheet or on-page specification table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL8X75SBF Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL8X75SBF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 8 mm |
| Push thrust @0.5 MPa | 38 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose the bore based on the thrust you need - a bigger bore gives more push. The 8 mm bore is the smallest in the HLQL family and suits light-load pick-and-place tasks. The ball-bearing guide (versus the cross-roller HLS) is selected when anti-rust and dust-proof operation matter more than ultimate rigidity. Stroke 75 mm is within the bore 8 range; confirm the exact stroke limit from the datasheet. The BF adjuster adds a shock absorber on the retraction side for smoother end-of-stroke deceleration. Thread is PT (tapered) as standard; select G or NPT (T) if your fittings require it. Route load and moment sizing to us - these are published as Wmax/Emax tables and deflection curves.
Applications
Small-Parts Pick-and-Place
Guides a small gripper horizontally between a feeder and an assembly nest with precise, repeatable positioning at 75 mm stroke.
Parts Transfer Station
Transfers lightweight components across a conveyor gap with the ball-bearing guide holding position under light side load.
Assembly Stage Traverse
Indexes a small workpiece into an assembly station; the symmetrical body allows balanced mounting and the shock absorber cushions retraction.
FAQ
What does the BF adjuster code mean on this HLQL model?
BF indicates a shock absorber fitted on the retraction side only, providing cushioned deceleration at the rod-in end of the 75 mm stroke. The extension side retains the standard bumper stop.
What is the maximum operating pressure for the bore 8 HLQL slide table?
Maximum working pressure is 0.7 MPa (100 psi). Operating pressure for bore 8 is 0.2 to 0.7 MPa (29 to 100 psi). Proof pressure is 1.2 MPa (175 psi). Never exceed 0.7 MPa in service.