Airtac HLSL Precision Slide Table Cylinder HLSL16X10SA
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL16X10SA is a genuine HLS slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL16X10SA
A slide-table cylinder pairs an air cylinder with a linear guide so the table moves straight without rotation. This HLSL16X10SA is a symmetrical cross-roller slide table with a 16 mm bore and 10 mm stroke, fitted with adjustable rubber stoppers at both ends for fine end-position control. The cross-roller guide provides high precision and rigidity with low deflection. The dual-rod double-acting design doubles the thrust, and a floating joint spares the rod from side torque.
This is a genuine AirTAC part. A magnet is standard, and the body has magnetic-switch slots for CMSH, DMSH, and EMSH sensor switches. We confirm thrust, dimensions, and load-moment figures from the datasheet or on-page spec table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL16X10SA Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL16X10SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
A 16 mm bore gives more thrust than the 6 or 8 mm bores while preserving the cross-roller precision that defines the HLS family. The symmetrical HLSL body is ideal where centered mounting or balanced loading is needed. The adjustable rubber stoppers on both ends let you fine-tune the stopping position beyond the basic bumper cushion; port thread is PT. For allowable load, moment, and kinetic energy, we reference the published Wmax, Emax, and moment tables and deflection curves.
Applications
Precision Gripper Traverse
Moves a gripper a short 10 mm distance with adjustable rubber stops for repeatable pick-and-place positioning on an electronics line.
Gauge Contact Probe
Advances a measuring probe to a workpiece surface with consistent end positioning controlled by rubber stoppers at both ends.
Small-Part Sorting Gate
Actuates a sorting flap or gate for small components with defined travel limits set by the adjustable stoppers.
FAQ
What does the A suffix mean on this model?
The A suffix indicates adjustable rubber stoppers fitted at both the extension and retraction ends. This lets you fine-tune the end positions beyond the standard bumper cushion. It is an HLS/HLQ-series adjuster option available on bore 8 and larger; bore 6 does not carry A-type stoppers.
How should I size the load and moment for this slide table?
Allowable load, moment, and kinetic energy are published as Wmax, Emax, and moment tables, with deflection shown as curves. We confirm the exact values for your bore and stroke from the datasheet. Never exceed the maximum working pressure of 0.7 MPa (100 psi) for bore 16.