Airtac HLSL Precision Slide Table Cylinder HLSL25X150SBS
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL25X150SBS is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL25X150SBS
The HLSL25X150SBS is the symmetrical cross-roller slide table of the HLS family: a double-acting, dual-rod air cylinder with the linear guide built into the body, so the table travels straight with minimal deflection. The two rods double the thrust of a comparable single-rod cylinder, and a floating joint keeps side loads off the rods. At 25mm bore this is a higher-thrust HLSL model, and the 150mm stroke gives a long, rigid guided traverse.
It is a genuine AirTAC part with the magnet fitted as standard - magnetic-switch slots on the body take CMSH, DMSH or EMSH switches. The BS code means shock absorbers are fitted on the extension side of the stroke. Run it on air filtered to 40 um at 0.15-0.7 MPa (22-100 psi), 0.7 MPa maximum working pressure, 50-500 mm/s, -20 to 70 C. Exact thrust, dimensions and load-moment ratings are confirmed from the datasheet or the on-page spec table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL25X150SBS Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL25X150SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose bore 25 when you need the stronger end of the HLSL cross-roller line - larger bore means more push, doubled again by the dual rods. Cross-roller is the guide to pick for highest precision and rigidity; HLQ ball-bearing suits anti-rust, dust-proof duty and HLF suits reduced-height envelopes. The 150mm stroke is within the bore-25 stroke table - verify your stroke against it before ordering. The BS suffix puts shock absorbers on the extension side only; choose BF for retraction side or B for both. Thread is PT. For load and moment sizing, send us the payload details and we will work from AirTAC's published tables and deflection curves.
Applications
Small-parts transfer
Shuttles small parts between stations along a straight 150mm path, with extension-side shock absorbers cushioning the delivery stroke.
Pick-and-place head travel
Carries a pick-and-place head across a machine bed; the cross-roller guide keeps the head square over the full stroke at 25mm-bore thrust levels.
Assembly station stopper-positioning
Positions and retracts a stopper or part-present fence on a conveyor, with the dual-rod table resisting the twist a side-loaded stopper would create.
FAQ
Why is the magnet not listed as an option for the HLSL25X150SBS?
Because it is standard on the whole series, not an option to add or decline. The S in the model code reflects that the piston is magnet-fitted and the body has magnetic-switch slots, so CMSH, DMSH or EMSH switches can be mounted directly for end-position sensing.
How should I size the load on this slide table?
Stay within 0.7 MPa working pressure (operating range 0.15-0.7 MPa for this bore) and control speed meter-out up to 500 mm/s. For allowable load and moment, do not rely on estimates - AirTAC publishes these as tables and deflection curves per bore and stroke, and we confirm the figures from the datasheet for your specific mounting.