Airtac HLSL Precision Slide Table Cylinder HLSL25X40SBS
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL25X40SBS is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL25X40SBS
The HLSL25X40SBS is AirTAC's symmetrical cross-roller slide table cylinder in a 25 mm bore with 40 mm stroke. Cylinder and linear cross-roller guide share one body, so the table moves in a straight, rigid path with low deflection under load. Dual rods on twin pistons give higher thrust than a single-rod body of the same bore, while the floating joint spares the rods from side torque. The BS suffix fits shock absorbers on the extension side to cushion the outward end of travel.
This is a genuine AirTAC part with a position-detection magnet fitted as standard; the magnetic-switch slots on the body accept CMSH, DMSH and EMSH sensor switches. Ask us to confirm thrust, dimensions and allowable load or moment figures for this exact model from the datasheet or the on-page specification table.
Airtac HLSL Precision Slide Table Cylinder HLSL25X40SBS Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL25X40SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Step up to bore 25 when the 16 mm or 20 mm sizes do not give enough push - thrust grows with bore, and the verified figure for this model sits in the on-page table. The HLSL cross-roller guide is the precision and rigidity pick in the AirTAC slide-table range; HLQ ball-bearing suits dusty or corrosive surroundings, HLF reduces height, and HLH miniature roller-ball covers 6-20 mm bores. The 40 mm stroke is within the published stroke range for bore 25, the BS adjuster places shock absorbers on the extension side, and the ports are 1/8" with PT threading (G and NPT variants exist). Route your load, moment and speed calculations to us and we will check them against the published tables and deflection curves.
Applications
Gripper traverse
Carry a gripper between stations on a compact automation line; the cross-roller guide holds alignment so the gripper meets the part squarely every cycle.
Stopper and indexing
Use the table as a precise stopper or indexing pad on a conveyor or rotary dial; the shock absorber on the extension side takes the impact as parts arrive.
Assembly stage
Feed and seat small components in an assembly head; dual rods deliver balanced thrust and the floating joint protects the rods from side loading.
FAQ
How do I choose between the shock-absorber positions on this model?
The BS code in HLSL25X40SBS means shock absorbers are fitted on the extension side only, BF places them on the retraction side, and plain B covers both ends. Match the position to where your load impacts the table at end of stroke. Note that B-type shock absorbers are offered on bores 8 through 25, not on bore 6.
Can I run this slide table at full plant air pressure?
Not above 0.7 MPa - that is the maximum working pressure, and for bore 25 the operating range is 0.15-0.7 MPa (22-100 psi). Proof pressure is 1.2 MPa (175 psi). Use clean air filtered to 40 um, keep the speed between 50 and 500 mm/s, and confirm allowable load and moment against the datasheet tables and curves before sizing.