Airtac HLSL Precision Slide Table Cylinder HLSL8X10SB
2、Pre-equipped positioning pin holes on guide rail for accurate mounting
3、Floating joint design prevents piston rod from bearing additional torsional loads
4、Dual piston rod configuration achieves double output force
5、Integrated positioning pin holes on main body for secure installation
6、Mounting screw holes provided on base surface and end faces
Category: Precision Slide Cylinder , Brand: AirTAC , Series: HLSL
AirTAC HLSL8X10SB Precision Slide Table Cylinder Specifications
- Model: HLSL8X10SB
- Bore size: Φ8mm
- Stroke: 10mm (±0.5mm tolerance)
- Operating pressure: 0.05-0.8 MPa
- Ambient temperature: -20℃ to 80℃
- Buffer type: Fixed rubber cushion (both ends)
- Repeat positioning accuracy: ±0.01mm
- Maximum speed: 500mm/s
- Mounting style: Dual linear guide rails with 4 mounting holes (M3 thread)
- Port size: M5x0.8 (G1/8 adaptor available)
- Rod material: Stainless steel SUS304
- Body material: Hard anodized aluminum alloy
- Seal material: NBR + PU hybrid seals
- Weight: 350g ±5%
- Dimensions: 120mm(L) × 45mm(W) × 35mm(H)
- Protection rating: IP54 (standard), IP67 optional
- Lubrication: Pre-lubricated (Grease-free operation)
Ultra-compact linear slide cylinder combining pneumatic actuation with precision linear guidance. Features zero-backlash ball bush bearings and dual 6mm hardened steel shafts (HRC60+) for micron-level repeatability. Integrated T-slot design allows direct mounting of optical components or sensors. Optimized for cleanroom environments with particle emission <100 particles/m³.
- Semiconductor wafer handling robots
- Micro-dispensing systems in PCB assembly
- Lens positioning in optical inspection equipment
- Precision sample staging in medical analyzers
- Automated micro-test probe positioning
Installation note:
Apply 0.3Nm torque limit on mounting screws. For vertical installations,
use auxiliary support brackets when axial load exceeds 2N. Relubricate
every 500km travel distance using ISO VG32 turbine oil.
Critical alignment:
Maximum allowable lateral load 5N. Misalignment beyond 0.02mm/50mm
will accelerate bearing wear. Use laser alignment tool during setup.
| Property | Property Value |
|---|---|
| sku | HLSL8X10SB |
| External Stop Block Type | Double-Ended Hydraulic Shock Absorber |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | M5×0.8 |
| Magnet | S-Magnetic |
| Bore Diameter | <8mm> |
| Stroke | <10mm> |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.