Airtac JSIJ32~50 Adjustable Cylinder JSIJ50X80-50
The AirTAC Airtac JSIJ32~50 Adjustable Cylinder JSIJ50X80-50 is a genuine double acting, adjustable stroke JIS-standard air cylinder with a Ø50mm bore and 80mm stroke, G1/4 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ50 mm
- Stroke80 mm
- Port sizeG1/4
- Acting typeDouble acting, adjustable stroke
- Rod threadM18×1.5
- CushionAdjustable, 20.5 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ32~50 Adjustable Cylinder JSIJ50X80-50
Delivering 982 N of push force at 0.5 MPa, this 50 mm bore JIS profile cylinder builds shorter than a same-size ISO 15552 unit while completely avoiding external tie rods. The hard-anodized aluminum barrel keeps the assembly light, and the G1/4 port matches the standard bore mapping.
An external stop screw lets you trim the extend stroke by up to 50 mm on-site, dropping the usable forward travel from the 80 mm maximum down to 30 mm without swapping the cylinder. This on-site tuning means the unit handles about 589 N of real work safely, or roughly 50 kg lifted vertically with a 2:1 margin. The retract end stays fixed, and the adjustable air cushions only decelerate the piston near the ends rather than holding the load.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ50X80-50 Technical Specifications
| Model | Airtac JSIJ32~50 Adjustable Cylinder JSIJ50X80-50 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 80 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/4 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20.5 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSIJ32~50 Adjustable Cylinder JSIJ50X80-50
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 50 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ32~50 Adjustable Cylinder JSIJ50X80-50 Is Used
Fixture Clamp Tuning
Dial in the exact clamp reach on a machining fixture by trimming the extend stroke up to 50 mm on-site, ensuring parts seat correctly without rebuilding the actuator.
Transfer Diverter
Set a precise diverter arm angle on a packaging line by shortening the forward travel from the 80 mm maximum, accommodating different box widths on the fly.
Compact Stacking Pusher
Fit a short-stroke pusher into a tight machine cell using the compact JIS profile, adjusting the push distance locally as pallet sizes change.
Is the Airtac JSIJ32~50 Adjustable Cylinder JSIJ50X80-50 the Right Cylinder?
Size this 50 mm bore against the 40 mm and 63 mm neighbors: the 40 mm yields 628 N push at 0.5 MPa while the 63 mm jumps to 1559 N, so pick the 50 mm when you need its specific 982 N output. The 50 mm extend-shortening window is ideal for sharing a single spare across multiple stroke variants or fine-tuning an end position after a fixture change. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. Because this SKU lacks the -S magnet, it cannot take CMSE or DMSE sensors; add the -S variant for position detection. For any stroke at or over 300 mm, guide the load externally to prevent side-load wear on the rod seal.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ32~50 Adjustable Cylinder JSIJ50X80-50 FAQ
At 0.5 MPa it pushes 982 N and pulls 825 N. At 0.7 MPa it pushes 1374 N and pulls 1154 N. The theoretical maximum force is 200 kgf at 1.0 MPa. The cylinder features a 20 mm rod, an M18x1.5 rod thread, and a G1/4 air port.
The nominal stroke is 80 mm, which is the maximum forward travel. The external adjuster lets you shorten the extend stroke on-site by up to 50 mm, giving a usable extend range of 30 to 80 mm. The retract end remains fixed. This mechanism sets the end position and does not hold the load; use an external rod lock or pilot-operated check valve if you need to hold a load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ32~50 Adjustable Cylinder JSIJ50X80-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.