The AirTAC AirTAC MBL63X75CA Mini Cylinder | 63mm Bore 75mm is a genuine double-acting aluminum-barrel mini round cylinder with a Ø63mm bore and 75mm stroke, G1/4 air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
The AirTAC MBL63X75CA is a compact double-acting aluminum mini round cylinder engineered for tight machine spaces where high force is required. Operating at 0.5 MPa, it provides 1558 N of push force and 1457 N of pull force across its 75 mm stroke. This genuine AirTAC component uses a G1/4 port and a Ø16 mm carbon steel rod with 20 µm hard-chrome plating to resist wear and corrosion.
Unlike rigid flat-end rear mounts, this SKU features a CA pivot (clevis) back cover that swings on a pin to accommodate arcing or angular loads. The cylinder relies on a fixed rubber bumper to soften end-of-stroke impacts rather than an adjustable air cushion. Because this specific configuration lacks the -S suffix, it cannot accept a CMSG, DMSG, or EMSG position sensor. Additionally, the riveted rolling-packed barrel keeps the body light but means it is not designed to be disassembled like a traditional tie-rod cylinder.
| Model | AirTAC MBL63X75CA Mini Cylinder | 63mm Bore 75mm |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Actuates a swinging diverter arm on a packaging line, utilizing the CA pivot back cover to handle the arcing motion while providing 1558 N of push force to redirect heavy cartons.
Ejects small stamped metal parts from a tight press bed, relying on the 75 mm stroke and 1457 N pull force to retract the tooling clear of the die.
Raises and lowers a light-duty pallet lift gate where the compact aluminum riveted body fits within narrow frame rails, delivering 2181 N of push at 0.7 MPa.
Select the 63 mm bore when your application demands heavy thrust in a compact footprint, pushing 1558 N at 0.5 MPa. If you need less force to save space, step down to the 50 mm bore which yields 981 N of push force. If you require even greater power, an ISO 15552 profile cylinder would be the next logical step up. For faster or heavier moving loads where the fixed rubber bumper causes cycle-limiting shock, upgrade to the MBLC variant which offers adjustable air cushioning.
This CA pivot back cover is ideal for mechanisms requiring angular rod movement during extension. Remember that a plain MBL does not hold its position if air pressure is lost; the rod will drift or drop. Use an external pilot-operated check valve or rod lock if the load must be safely suspended. Exact replacement requires: 63 mm bore, 75 mm stroke, G1/4 port, PT thread, CA pivot back cover, no magnet, and standard double-acting function.
Quick checklist
At 0.5 MPa, the push force is 1558 N and the pull force is 1457 N. At 0.7 MPa, the push force increases to 2181 N. The theoretical maximum force is 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, because this SKU does not have the -S suffix, it lacks a built-in magnet and cannot accept CMSG, DMSG, or EMSG sensor switches. You must select an MBL63X75SCA variant if electronic or reed position detection is required for your control system.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.