Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X175CA
The AirTAC Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X175CA is a genuine double-acting aluminum-barrel mini round cylinder with a Ø63mm bore and 175mm stroke, G1/4 air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
- BoreØ63 mm
- Stroke175 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM14×1.5
- CushionRubber bumper (MBLC variant: adjustable air cushion)
About the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X175CA
The AirTAC MBLC63X175CA is a double-acting aluminum mini cylinder engineered for heavy-duty compact automation. It delivers 1558 N of push force and 1457 N of pull force at 0.5 MPa, utilizing a 63 mm bore and a 175 mm stroke. A standout feature is the screw-adjustable pneumatic cushion at both ends, which decelerates the piston smoothly near stroke completion to absorb kinetic energy, drastically reducing end-cover impact and vibration during high-speed operations.
This specific configuration uses a CA pivot clevis back cover that swings on a pin to accommodate arcing angular loads, making it superior to rigid flat-end mounts for dynamic linkages. The riveted rolling-packed aluminum barrel keeps the body lightweight yet robust, while the 20 µm hard-chrome plated carbon-steel rod resists wear. Note that this SKU lacks a built-in magnet, so it cannot support CMSG, DMSG, or EMSG electronic position sensing.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X175CA Technical Specifications
| Model | Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X175CA |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø63 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X175CA
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 63 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Where the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X175CA Is Used
Stamping Press Ejection
Uses the 1558 N push force at 0.5 MPa to knock stamped metal blanks out of progressive dies, relying on the adjustable cushion to brake the 16 mm rod smoothly at 175 mm.
Pallet Diverting Arm
Leverages the CA pivot back cover to swing a diverter mechanism across a packaging line, handling heavy pallets without binding the rod bearings.
Warehouse Shuttle Pusher
Accelerates goods carriers into storage channels, using the tunable end cushions to prevent harsh impacts that could shift unbalanced loads at 800 mm/s.
Is the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X175CA the Right Cylinder?
As the largest standard bore in the MBL/MBLC series, this 63 mm model provides maximum thrust with no larger sibling available; to step down, the 50 mm bore offers 981 N push at 0.5 MPa. Choose this MBLC variant over the base fixed-bumper MBL when driving heavier masses or cycling at high frequencies where a rubber bumper would degrade. Remember that the adjustable air cushion only decelerates the rod near the ends and does not lock position—if air is lost, the rod will drift, requiring an external pilot-operated check valve for holding. Replacement parts require matching the 63 mm bore, 175 mm stroke, G1/4 port, PT thread, and CA pivot cover.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X175CA FAQ
At 0.5 MPa, this 63 mm bore cylinder provides 1558 N of push force and 1457 N of pull force. At 0.7 MPa, the push increases to 2181 N. The maximum theoretical force is 318 kgf at 1.0 MPa.
A screw-tunable needle at each end controls the exhaust flow to trap a pocket of air, decelerating the piston smoothly before it hits the end cover. You tune it to match the load and speed, which protects the cylinder on fast, heavy moves far better than a fixed rubber bumper.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X175CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.