Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X60CA
The AirTAC Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X60CA is a genuine double-acting aluminum-barrel mini round cylinder with a Ø63mm bore and 60mm stroke, G1/4 air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
- BoreØ63 mm
- Stroke60 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM14×1.5
- CushionRubber bumper (MBLC variant: adjustable air cushion)
About the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X60CA
The AirTAC MBLC63X60CA is a compact double-acting aluminum mini cylinder engineered with a screw-adjustable pneumatic cushion at both ends. Delivering a robust 1558 N push and 1457 pull at 0.5 MPa, this 63 mm bore unit is built for fast, heavy moves where a fixed rubber bumper would fail. The 60 mm stroke provides rapid, high-force extension and retraction in tight automation footprints.
This SKU features a CA pivot clevis back cover that swings on a pin to accommodate arcing loads, preventing rod binding during angular movement. It lacks a built-in magnet, meaning it cannot accept a CMSG, DMSG, or EMSG position sensor. The riveted rolling-packed aluminum barrel keeps the body light, while the 20 µm hard-chrome plated carbon-steel rod resists wear against the heterogeneous two-way grease-retaining piston seal.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X60CA Technical Specifications
| Model | Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X60CA |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X60CA
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Where the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X60CA Is Used
Injection Mold Ejection
Provides 1558 N of push at 0.5 MPa to knock out dense plastic parts, using the adjustable cushion to stop the 60 mm stroke smoothly without slamming the mold plate.
Pallet Diverters
Pivots on its CA clevis to align heavy pallets on a packaging line, absorbing the angular side-load while shifting loads at high cycle rates.
Bottle Sorter Gates
Handles high-speed sorting of glass containers by retracting rapidly in 60 mm, tuning the air cushion to prevent end-cap impact that could shift the machine frame.
Is the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X60CA the Right Cylinder?
To size this actuator, step down to the 50 mm bore for 981 N push at 0.5 MPa, or step up if you require even more force. Choose this MBLC variant over the base MBL when your cycle frequency is high and the moving mass is heavy, as the tunable needle decelerates the piston smoothly near stroke ends to protect the end covers. Note that this cushion only decelerates; it does not lock. A plain cylinder drifts when air is lost, so add an external rod lock for position holding. Replacement match: 63 mm bore, 60 mm stroke, G1/4 port, PT thread, CA pivot back cover, no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X60CA FAQ
At 0.5 MPa, it pushes with 1558 N and pulls with 1457 N. At 0.7 MPa, push increases to 2181 N, with a maximum theoretical output of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
A screw-tunable needle at both ends restricts exhaust air to decelerate the piston near the stroke ends. You adjust it to match your load and speed, cutting impact noise and vibration. It only decelerates near the ends and does not lock the rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X60CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.