Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X60SCA
The AirTAC Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X60SCA is a genuine double-acting aluminum-barrel mini round cylinder with a Ø63mm bore and 60mm stroke, G1/4 air ports and a fixed rubber bumper. Its compact riveted body suits push, hold and clamp motion in tight machine spaces.
- BoreØ63 mm
- Stroke60 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM14×1.5
- CushionRubber bumper (MBLC variant: adjustable air cushion)
About the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X60SCA
The AirTAC MBLC63X60SCA is a double-acting, 63 mm bore aluminum mini cylinder with a 60 mm stroke. It produces 1558 N of push force and 1457 N of pull force at 0.5 MPa, scaling to 2181 N push at 0.7 MPa. The riveted rolling-packed aluminum barrel keeps the body compact for tight spaces, while the 20 µm hard-chrome plating on the carbon-steel rod defends against wear. A built-in magnet (-S) enables position detection.
This model uses a screw-adjustable pneumatic air cushion at both ends to decelerate the piston smoothly near stroke limits, absorbing heavy impacts that a fixed rubber bumper cannot handle. The CA pivot back cover swings on a pin to accommodate arcing loads, and the heterogeneous two-way grease-retaining piston seal maintains lubrication across the 30-800 mm/s speed range.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X60SCA Technical Specifications
| Model | Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X60SCA |
|---|---|
| Series | MBL aluminum-barrel mini round cylinder |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper (MBLC variant: adjustable air cushion) |
| Max stroke | Up to 500 mm |
Specifications follow the official AirTAC MBL series datasheet. Confirm against the product label before installation. Standard stroke to 500 mm (special order to 800 mm). Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X60SCA
| MBL | Aluminum-barrel mini round cylinder, double acting. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: MBLC (adjustable cushion), MBLD (double rod), MBLJ (adjustable stroke), MSBL/MTBL (single acting).
Where the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X60SCA Is Used
Injection Mold Ejection
Provides 1558 N of push force at 0.5 MPa to eject plastic parts from a mold, using the adjustable air cushion to halt the 60 mm stroke softly without slamming the back plate.
Pallet Diverting Arm
Drives a pivoting diverter arm on a packaging line, where the CA pivot back cover accommodates the lateral arc of the mechanism while moving heavy product loads.
PCB Press Fit Assembly
Presses connectors onto printed circuit boards with precise 60 mm travel, relying on the -S magnet and a DMSG electronic sensor to confirm the press stroke for the control system.
Is the Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X60SCA the Right Cylinder?
Step down to the 50 mm bore if your application requires less energy, as it yields 981 N push at 0.5 MPa, or step up to this 63 mm bore for 1558 N when moving heavier masses. Choose this MBLC variant over the base MBL when cycling fast or moving high inertia, because the tunable cushion needle protects the end covers. The CA clevis mount is ideal for angular movements, though an external guide is recommended to manage side-load on the Ø16 rod. Replacement match: 63 mm bore, 60 mm stroke, G1/4 port, PT thread, CA back cover, no mounting bracket, with -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB / FA / SDB) and back cover (CA pivot / U flat-end).
- check Installation by qualified personnel per AirTAC docs.
Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X60SCA FAQ
At 0.5 MPa, this 63 mm bore cylinder provides 1558 N push and 1457 N pull force. At 0.7 MPa, the push increases to 2181 N. The maximum theoretical force is 318 kgf at 1.0 MPa.
A screw-tunable needle at both ends restricts exhaust flow to decelerate the piston near the stroke ends. You tune the needle to match the load and speed, reducing impact and vibration on fast or heavy cycles. It only decelerates near the ends and does not lock or hold the load in place.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MBLC Aluminum Alloy Mini Air Cylinder MBLC63X60SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.