Airtac MD Multi-Position Clamping Cylinder MD10X25S
The AirTAC Airtac MD Multi-Position Clamping Cylinder MD10X25S is a genuine MD multi-mount cylinder (double acting), 10 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 39.3 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, double acting
- SeriesMD (standard)
- Bore10 mm
- Push thrust @0.5 MPa39.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MD Multi-Position Clamping Cylinder MD10X25S
The MD10X25S is a genuine AirTAC MD multi-mount cylinder, a compact square-body air cylinder that can be fixed from 6 directions: front, back, left, right, top and bottom. Bodies mount side by side to save space, with magnetic-switch slots around the body. This 10 mm bore double acting unit delivers about 39.3 N of theoretical push force at 0.5 MPa and a 25 mm stroke, with a bumper cushion for end-of-stroke deceleration, making it a good fit for light clamping and positioning of small parts.
This is a genuine AirTAC part in the standard MD family, where piston rod rotation is not restricted. The trailing S in the SKU means this unit is built with a magnet for magnetic switch sensing. We confirm dimensions and sizing from the datasheet on request before you order.
Airtac MD Multi-Position Clamping Cylinder MD10X25S Technical Specifications
| Model | Airtac MD Multi-Position Clamping Cylinder MD10X25S |
|---|---|
| Type | Multi-mount cylinder, double acting |
| Series | MD (standard) |
| Bore | 10 mm |
| Push thrust @0.5 MPa | 39.3 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Choose the 10 mm bore for light-duty thrust: about 39.3 N theoretical push at 0.5 MPa. If you need to prevent rod rotation, step to the MK family instead of this MD. Acting type here is double acting with 30-500 mm/s speed and 0.15-1.0 MPa operating pressure. The 25 mm stroke sits inside the 10 mm bore double acting limit of 35 mm - keep strokes short, since a long stroke needs more cover room than a compact body provides. This SKU carries the S magnet option and PT thread (choose G if needed). If side load is part of your application, confirm it with us from the datasheet.
Applications
Small-parts clamping
Fix the body from the side or top of a fixture and use the 10 mm bore push force to hold small workpieces during a manual assembly or inspection step.
Jig positioning
Mount cylinders side by side on a jig plate to add locating or pusher positions in a tight footprint, driving each 25 mm stroke from the same air supply.
Light gate actuation
Bolt the cylinder beneath a conveyor line and use the double acting stroke to swing or extend a small gate or stopper for diverting tiny parts.
FAQ
What does the S at the end of MD10X25S mean, and what thread do I get?
The trailing S means this cylinder is built with a magnet, so it can be sensed by magnetic switches in the slots around the body; without the S the unit has no magnet. The thread is PT on this SKU (G is available on request), and the 10 mm bore takes an M5x0.8 port.
Can I mount this cylinder from any face, and how long a stroke can the 10 mm bore take?
Yes - the square body fixes from 6 directions (front, back, left, right, top, bottom) and cylinders can be mounted side by side. The 10 mm double acting bore offers strokes up to 35 mm; this SKU's 25 mm stroke is comfortably inside that. For side load limits and exact dimensions per stroke, confirm from the datasheet.