Airtac MD Multi-Position Clamping Cylinder MD16X10
The AirTAC Airtac MD Multi-Position Clamping Cylinder MD16X10 is a genuine MD multi-mount cylinder (double acting), 16 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 100.5 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, double acting
- SeriesMD (standard)
- Bore16 mm
- Push thrust @0.5 MPa100.5 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWithout magnet
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MD Multi-Position Clamping Cylinder MD16X10
The MD16X10 is a compact multi-mount cylinder with a 16 mm bore and a 10 mm stroke. The square body fixes from six directions - front, back, left, right, top and bottom - so cylinders mount side by side to save space, with magnetic-switch slots around the body and high guide precision without added lubrication. Double acting at this bore gives a theoretical push thrust of 100.5 N at 0.5 MPa, and the cushion is a bumper.
This is a genuine AirTAC part from the MD standard family, where the rod is allowed to rotate; the MK family is the no-rotating alternative. This SKU carries no magnet, since the code has no trailing S. Typical materials include an aluminium-alloy body, stainless or S45C rod and NBR seals; we confirm exact dimensions and sizing from the datasheet on request.
Airtac MD Multi-Position Clamping Cylinder MD16X10 Technical Specifications
| Model | Airtac MD Multi-Position Clamping Cylinder MD16X10 |
|---|---|
| Type | Multi-mount cylinder, double acting |
| Series | MD (standard) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 100.5 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | Without magnet |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
The 16 mm bore delivers a theoretical push force of 100.5 N at 0.5 MPa double acting - a step up from the 10 mm bore at 39.3 N if you need firmer clamping or pushing. Choose MD when rod rotation is acceptable and MK when it must be prevented. Acting types run double (MD), single push (MSD), single pull (MTD), double rod (MDD) and adjustable stroke (MDJ, adding a 10/20/30 mm adjustable range). Double-acting bore 16 strokes run up to 50 mm; the short cover is why an over-long stroke should be avoided. This SKU has no magnet - add the S suffix if you need switch detection - and uses a PT thread; G is available. Side-load ratings are not listed here - route them to us.
Applications
Small-parts clamp
Clamps housings or castings in machining and assembly fixtures; the 16 mm bore delivers 100.5 N theoretical push at 0.5 MPa, with a bumper cushion for a gentle stop.
Jig positioning
Sets workpiece position in weld or assembly jigs; fixing from six directions lets one body size serve many jig faces, and units mount side by side for multi-point location.
Conveyor gate and stopper
Extends as a stopper or diverter gate on light conveyor lines, halting parts between stations where a compact square body is the only cylinder that fits.
FAQ
How do I choose between MD16X10 and an MK no-rotating model?
MD allows piston-rod rotation, which suits clamping and pushing where the rod end can turn freely. If your tooling or workpiece must stay in one orientation, choose the MK family instead, which adds a no-rotating plate and fixed rod to stop the rod turning.
Is a longer stroke available on the 16 mm bore?
Yes. Double-acting bore 16 cylinders run up to a 50 mm stroke in the standard table. Keep the stroke realistic for the compact body, since the short cover design cautions against an over-long stroke; exact dimensions per stroke are in the datasheet.