Airtac MD Multi-Position Clamping Cylinder MD20X30S
The AirTAC Airtac MD Multi-Position Clamping Cylinder MD20X30S is a genuine MD multi-mount cylinder (double acting), 20 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 157.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, double acting
- SeriesMD (standard)
- Bore20 mm
- Push thrust @0.5 MPa157.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MD Multi-Position Clamping Cylinder MD20X30S
The MD20X30S is a double acting multi-mount cylinder from AirTAC with a 20 mm bore and 30 mm stroke. The square body fixes from six directions, so cylinders mount side by side to save space, and magnetic-switch slots sit around the body for position sensing. At 0.5 MPa the bore gives a theoretical push force of about 157.1 N, cushioned by an elastic bumper for light-duty clamping and positioning.
This is a genuine AirTAC part, and the SKU includes the built-in magnet shown by the S suffix. It comes from the standard MD family - choose the MK family instead where the rod must not rotate. Operating range, port size and exact per-stroke dimensions can be confirmed from the datasheet on request.
Airtac MD Multi-Position Clamping Cylinder MD20X30S Technical Specifications
| Model | Airtac MD Multi-Position Clamping Cylinder MD20X30S |
|---|---|
| Type | Multi-mount cylinder, double acting |
| Series | MD (standard) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 157.1 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
A 20 mm bore gives a theoretical push thrust of 157.1 N at 0.5 MPa, the figure to size light clamping or gating against. MD means rod rotation is allowed, MK prevents it. Acting type is your call: double (this model), single push (MSD/MSK), single pull (MTD/MTK), double rod (MDD/MKD) or adjustable stroke (MDJ/MKJ). Strokes for this bore run up to 60 mm, though the short-cover design means very long strokes should be avoided. This SKU carries the S magnet and PT thread; G is available.
Applications
Jig locating pins
Extend and retract a locating pin in a drill or weld jig; six-way fixing lets the body sit wherever the jig frame allows.
Pick-and-place slides
Drive a light pneumatic slide that moves small parts a short 30 mm between nest and outlet, with units mounted side by side on one rail.
Part ejection from nests
Push small finished parts out of a nest or chute with a short vertical stroke, using the compact body where full-size cylinders will not fit.
FAQ
What does the S in MD20X30S mean?
It means this SKU includes the built-in magnet, so the cylinder can be paired with magnetic switches seated in the slots around the body. Order the code without the S if you do not need position sensing; the S suffix is a choice, not a fixed feature of the family.
Can I order a longer stroke on the 20 mm bore?
The bore 20 table runs up to 60 mm, but the short-cover design means an over-long stroke should be avoided. This 30 mm stroke is a comfortable fit; confirm any longer option or unusual mounting with us and the datasheet before ordering.