Airtac MD Multi-Position Clamping Cylinder MD25X10
The AirTAC Airtac MD Multi-Position Clamping Cylinder MD25X10 is a genuine MD multi-mount cylinder (double acting), 25 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 245.4 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, double acting
- SeriesMD (standard)
- Bore25 mm
- Push thrust @0.5 MPa245.4 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWithout magnet
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MD Multi-Position Clamping Cylinder MD25X10
The AirTAC MD25X10 is a 25 mm bore, 10 mm stroke, double acting multi-mount cylinder. Multi-mount bodies fix from six directions - front, back, left, right, top and bottom - and mount side by side to save space, with magnetic-switch slots around the body and high guide precision without added lubricant. The short 10 mm stroke suits small push-and-return jobs: at 0.5 MPa the bore gives about 245.4 N of theoretical push force, and the bumper cushion absorbs end-of-stroke impact.
This is a genuine AirTAC part from the MD family, the standard multi-mount cylinder; rod rotation is allowed, with the MK family covering no-rotating needs. The SKU has no S suffix, so it is supplied without a magnet. Exact dimensions for the 10 mm stroke are confirmed from the datasheet - we can provide sizing on request.
Airtac MD Multi-Position Clamping Cylinder MD25X10 Technical Specifications
| Model | Airtac MD Multi-Position Clamping Cylinder MD25X10 |
|---|---|
| Type | Multi-mount cylinder, double acting |
| Series | MD (standard) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 245.4 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | Without magnet |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore sets the force: 25 mm gives 245.4 N theoretical push at 0.5 MPa, double acting; drop to 20 mm (157.1 N) for lighter loads or step up to 32 mm (402.1 N). This SKU is double acting with a 10 mm stroke, well inside the up-to-60 mm stroke range for this bore - a short stroke keeps the compact body truly compact, and the bumper cushions the stroke ends. MD is the standard version and allows rod rotation; choose MK if the rod must not rotate. No S suffix means no magnet; add S for switch detection. Thread is PT; G is available on request.
Applications
Small-parts clamp
Clamps a small component into a drill jig with a 10 mm push at up to 245.4 N of theoretical force at 0.5 MPa, fixed from the jig's side face.
Nest ejector
Ejects finished parts out of a locating nest on a rotary dial table; the 10 mm stroke clears the part without wasting cycle time.
Jig positioning
Nudges a workpiece against a stop before fastening, with units mounted side by side on a multi-station fixture to save space.
FAQ
How much force does the 25 mm bore deliver?
At 0.5 MPa the theoretical push force is about 245.4 N, with the pull side lower. Operating pressure for this double acting 25 mm bore is 0.15-1.0 MPa (22-145 psi). Check the thrust your job needs against these figures before fixing the bore size.
Can I fix MD25X10 from any side of the body?
Yes. The multi-mount body fixes from six directions - front, back, left, right, top and bottom - so you can bolt it wherever the fixture allows and mount units side by side to save space. Overall dimensions depend on the stroke, so confirm them from the datasheet.