Airtac MD Multi-Position Clamping Cylinder MD25X60S

The MD25X60S is a compact square-body multi-mount cylinder from AirTAC's MD family: double acting, with a 25 mm bore and a 60 mm stroke, and supplied with a magnet so magnetic switches can read piston position through the slots machined around the body. The body fixes from six directions - front, back, left, right, top and bottom - so it can be mounted wherever the frame allows and placed side by side with other cylinders to save space. On filtered air at 0.5 MPa, the 25 mm bore gives about 245.4 N of theoretical push force (the pull side is lower), with a bumper-style cushion and operating pressure of 0.15-1.0 MPa (22-145 psi). The 60 mm stroke sits at the top of this bore's double acting stroke table, suiting longer positioning and transfer moves.

This is a genuine AirTAC part. The MD family is the standard multi-mount cylinder where rod rotation is not blocked; if the rod must be held against turning, select from the MK no-rotating family instead. The magnet here is fitted exactly as this SKU shows - the trailing S indicates it is included. We confirm overall dimensions and sizing against the datasheet on request before you order.

Select the bore for force: this 25 mm bore provides roughly 245.4 N theoretical push at 0.5 MPa as a double acting cylinder, with a lower pull-side figure. MD is the standard version where rod rotation is allowed; pick MK when rotation must be prevented. Acting options are double acting, single-push (MSD), single-pull (MTD), double rod (MDD) and adjustable-stroke (MDJ). The 60 mm stroke is the maximum for a 25 mm bore double acting cylinder - take care not to specify strokes longer than the body suits, and verify dimensions from the datasheet. The trailing S means the magnet is included for switch detection; SKUs without S have no magnet. Thread is PT on this SKU, with G available as an alternative. Side-load ratings are not listed here - confirm from the datasheet.