Airtac MD Multi-Position Clamping Cylinder MD32X10H
The AirTAC Airtac MD Multi-Position Clamping Cylinder MD32X10H is a genuine MD multi-mount cylinder (double acting), 32 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 402.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, double acting
- SeriesMD (standard)
- Bore32 mm
- Push thrust @0.5 MPa402.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionBumper
- MagnetWithout magnet
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MD Multi-Position Clamping Cylinder MD32X10H
The MD32X10H is a genuine AirTAC multi-mount cylinder with a 32 mm bore and a short 10 mm stroke. Its compact square body fixes from 6 directions - front, back, left, right, top and bottom - and units mount side by side to save space, with magnetic-switch slots around the body. As a double acting cylinder it gives a theoretical push thrust of about 402.1 N at 0.5 MPa, well suited to short clamp, stopper and indexing moves, with a bumper cushioning the piston at each end.
This is a genuine AirTAC part from the standard MD family, where the rod is free to rotate unless your tooling prevents it. No magnet suffix appears on this SKU, so it is supplied without a magnet, and the trailing H in the part number should be confirmed from the datasheet on request. We confirm dimensions and sizing from the datasheet whenever you need them.
Airtac MD Multi-Position Clamping Cylinder MD32X10H Technical Specifications
| Model | Airtac MD Multi-Position Clamping Cylinder MD32X10H |
|---|---|
| Type | Multi-mount cylinder, double acting |
| Series | MD (standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 402.1 N |
| Port size | 1/8" (PT thread) |
| Magnet | Without magnet |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Select the 32 mm bore for the strongest thrust in the series - about 402.1 N push at 0.5 MPa on this double acting model. Stay with MD rather than MK when rod rotation does not matter. The family also offers single acting push (MSD), single acting pull (MTD), double rod (MDD) and adjustable stroke (MDJ) variants. The 10 mm stroke is well within the 60 mm maximum for this bore, but remember the short cover means an over-long stroke is not practical - keep to the datasheet stroke table. This SKU carries no magnet suffix; add the S suffix if you need magnet-based switch detection. Thread is PT standard or G on request, with a 1/8" port at this bore. Route side-load questions to us.
Applications
Fixture clamp for small housings
A 10 mm stroke is enough to clamp small housings or brackets in a drilling fixture, and the 6-direction body bolts directly into machine plates from any face.
Compact pick-and-place release
Mounted side by side on a gantry head, the short-stroke cylinder ejects or releases small parts at the pick-and-place station without adding bulk to the end effector.
Jig positioning pin
The cylinder extends and retracts a positioning pin to locate workpieces in a welding or assembly jig, where the compact square body saves rail space.
FAQ
Should I choose MD or MK for this application?
The MD is the standard multi-mount cylinder, so the rod may rotate under side conditions; the MK family adds a no-rotating plate and fixed rod that stop the rod turning. If your tooling needs the rod orientation held, ask about the MK equivalent.
What is the maximum stroke for this 32 mm bore?
Double acting cylinders at this bore go up to 60 mm in the standard table, but the short cover means an over-long stroke is impractical, so keep within the datasheet list. The 10 mm stroke on this model is a short, quick move.