Airtac MDJ Adjustable Cylinder MDJ10X10-10
The AirTAC Airtac MDJ Adjustable Cylinder MDJ10X10-10 is a genuine MD multi-mount cylinder (adjustable stroke), 10 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 39.3 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, adjustable stroke
- SeriesMD (standard)
- Bore10 mm
- Push thrust @0.5 MPa39.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWithout magnet
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ10X10-10
The AirTAC MDJ10X10-10 is an adjustable-stroke multi-mount cylinder with a 10 mm bore, a 10 mm base stroke and a 10 mm adjustable range. The adjuster lets you set the exact end position on the machine instead of ordering a fixed length. The compact body mounts from six directions and gives about 39.3 N of push at 0.5 MPa.
This is a genuine AirTAC MD-family part. This SKU has no magnet fitted; add S for the sensor-ready version. We confirm dimensions and sizing from the datasheet on request.
Airtac MDJ Adjustable Cylinder MDJ10X10-10 Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ10X10-10 |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MD (standard) |
| Bore | 10 mm |
| Push thrust @0.5 MPa | 39.3 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | Without magnet |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Choose the adjustable MDJ when the end position needs fine-tuning after fit-up: the 10 mm range trims the stroke on the machine. The 10 mm bore gives about 39.3 N of push at 0.5 MPa. Add S for the magnet and pick PT or G thread.
Use MK-family if the rod must not rotate. The cover and piston are short, so keep the base stroke moderate; ask us for dimensions.
Applications
Fine-set end stop
Trims the extended position on the machine so the tool lands exactly where needed.
Adjustable pusher
Sets a repeatable push length that is dialled in during commissioning.
Tight jig with tuning
Fits a compact fixture where the stroke must be tweaked without changing the part.
FAQ
What does the second number in MDJ10X10-10 mean?
It is the adjustable-stroke range in mm. Here a 10 mm range fine-tunes the end position on top of the 10 mm base stroke.
How much force does it give?
About 39.3 N of push at 0.5 MPa on the 10 mm bore, with a 0.15 to 1.0 MPa operating range.