Airtac MDJ Adjustable Cylinder MDJ16X15-10S
The AirTAC Airtac MDJ Adjustable Cylinder MDJ16X15-10S is a genuine MD multi-mount cylinder (adjustable stroke), 16 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 100.5 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, adjustable stroke
- SeriesMD (standard)
- Bore16 mm
- Push thrust @0.5 MPa100.5 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ16X15-10S
The MDJ16X15-10S is a compact AirTAC multi-mount cylinder that can be fixed from 6 directions (front, back, left, right, top and bottom), so units mount side by side to save space. This adjustable-stroke variant pairs a 16 mm bore and 15 mm base stroke with a 10 mm adjustable range, double acting for work in both directions. At 0.5 MPa it develops a theoretical push force of 100.5 N, with cushioning by bumper.
This is a genuine AirTAC part in the MD standard family, where the rod is free to rotate; choose the MK no-rotating family if rotation must be stopped. The trailing S in the code means this cylinder is fitted with a magnet for position sensing. We confirm exact dimensions and sizing from the AirTAC datasheet on request.
Airtac MDJ Adjustable Cylinder MDJ16X15-10S Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ16X15-10S |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MD (standard) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 100.5 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Match the bore to your force: this 16 mm double-acting bore gives a theoretical 100.5 N push (86.4 N pull) at 0.5 MPa. Take MD when rod rotation is acceptable, or MK when it is not. Acting options span double acting, single-push (MSD), single-pull (MTD), double rod (MDD) and adjustable-stroke (MDJ, this variant, which adds a 10/20/30 mm adjustable range). Strokes for bore 16 run to 50 mm in the table, but avoid an over-long stroke against the short cover. The trailing S adds the magnet; without it the code has no magnet. Port thread is PT by default, G on request. Route side-load limits to us.
Applications
Jig positioning
Switch slots around the body and the magnet in this code let you signal jig position, while the 10 mm adjustable range dials in the stop point.
Compact press-out station
Side-by-side mounting stacks several 16 mm cylinders in a small press or ejection station; the bumper cushions each stroke end.
Gate or stopper control
Top or bottom fixing suits a low-profile gate stopper on a conveyor, and the magnet confirms the gate is fully retracted.
FAQ
Does MDJ16X15-10S include a position-sensing magnet?
Yes. The trailing S in the model code means this cylinder is fitted with a magnet, and magnetic-switch slots are machined around the body. Codes without the S have no magnet; magnet is an option, not a standard feature.
How many ways can this cylinder be mounted?
The multi-mount square body fixes from 6 directions: front, back, left, right, top and bottom, and units mount side by side to save space. Dimensions are per stroke, so confirm figures from the datasheet, and consult us before applying side-load.