Airtac MDJ Adjustable Cylinder MDJ16X35-10S
The AirTAC Airtac MDJ Adjustable Cylinder MDJ16X35-10S is a genuine MD multi-mount cylinder (adjustable stroke), 16 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 100.5 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, adjustable stroke
- SeriesMD (standard)
- Bore16 mm
- Push thrust @0.5 MPa100.5 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ16X35-10S
The MDJ16X35-10S is an adjustable-stroke multi-mount cylinder: a compact square-body unit that fixes from six directions (front, back, left, right, top and bottom) and mounts side by side so several cylinders share one tight footprint. With its 16 mm bore this double-acting model develops a theoretical 100.5 N push at 0.5 MPa, suited to light clamping and positioning jobs, while the 35 mm stroke carries a 10 mm adjustable range. Cushioning is a bumper, magnetic-switch slots are provided around the body, and the cylinder runs at 30-500 mm/s.
This is a genuine AirTAC part from the standard MD family; the MK family shares the same compact format but adds a no-rotating plate that stops the rod turning. Magnet: this SKU includes a built-in magnet, shown by the trailing S in the code. It operates on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi) between -20 and 70 C. We are happy to confirm dimensions and sizing from the datasheet on request.
Airtac MDJ Adjustable Cylinder MDJ16X35-10S Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ16X35-10S |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MD (standard) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 100.5 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore sets the force: at 0.5 MPa this 16 mm cylinder delivers a theoretical 100.5 N on the push stroke and 86.4 N pulling. Choose MD if rod rotation is acceptable, MK if rotation must be prevented, and pick the acting type: double (MD/MK), single push (MSD/MSK), single pull (MTD/MTK), double rod (MDD/MKD) or adjustable stroke (MDJ/MKJ). The 35 mm stroke is within the 50 mm limit for bore 16 double-acting models, and this J version adds a 10 mm adjustable range; the short-cover design is not intended for over-long strokes, so keep stroke modest. Specify the magnet with a trailing S, choose PT or G thread (PT here, M5x0.8 port), and contact us to check side-load figures from the datasheet.
Applications
Small-parts clamping
Side-by-side mounting lets a row of 16 mm cylinders clamp several small housings or brackets in one compact fixture, each applying about 100.5 N at 0.5 MPa.
Jig positioning
The six-direction fixing and magnetic-switch slots make it easy to bolt the cylinder into a drill or assembly jig wherever a short 35 mm positioning stroke is needed.
Light pick-and-place
The adjustable range fine-tunes the end position when sliding small components between nests, while the bumper cushions each extend and retract.
FAQ
What does the -10 in MDJ16X35-10S mean?
This is an adjustable-stroke model: the 35 mm stroke carries a 10 mm adjustable range. The trailing S shows that a magnet is built in, so magnetic switches can be sensed on the body slots. Without the S the cylinder has no magnet.
How can I mount this cylinder in a tight machine?
The square body fixes from six directions (front, back, left, right, top and bottom) and several units mount side by side to save space. Overall dimensions depend on the stroke, so confirm exact figures from the datasheet before designing the mounting.