Airtac MDJ Adjustable Cylinder MDJ25X30-10S
The AirTAC Airtac MDJ Adjustable Cylinder MDJ25X30-10S is a genuine MD multi-mount cylinder (adjustable stroke), 25 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 245.4 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, adjustable stroke
- SeriesMD (standard)
- Bore25 mm
- Push thrust @0.5 MPa245.4 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ25X30-10S
The MDJ25X30-10S is an AirTAC multi-mount cylinder in the MDJ adjustable-stroke variant: a compact square-body, double acting cylinder that fixes from 6 directions (front, back, left, right, top and bottom) and mounts side by side to save space. The 25mm bore delivers 245.4 N theoretical push thrust at 0.5 MPa, the 30mm base stroke gains a 10mm adjustable range, and double acting operation powers both stroke directions, with a bumper as the cushion. Magnetic-switch slots around the body pair with the fitted magnet for position sensing.
This is a genuine AirTAC part in the standard MD family; the MK line is the separate no-rotating variant. The trailing S in this SKU means the magnet is fitted, and the thread is PT (G is available on other SKUs). We confirm dimensions, sizing and sensor suitability from the datasheet on request.
Airtac MDJ Adjustable Cylinder MDJ25X30-10S Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ25X30-10S |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MD (standard) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 245.4 N |
| Port size | M5x0.8 (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Size the bore for thrust: this 25mm double acting unit provides about 245.4 N theoretical push at 0.5 MPa. Choose MD when rod rotation is acceptable; choose MK when it must be prevented. Acting choices run from double acting to single acting push (MSD), single acting pull (MTD), double rod (MDD) and this adjustable-stroke MDJ. The 30mm stroke is within the bore 20/25/32 limit of 60 mm, and MDJ adds a 10/20/30mm adjustable range; keep the base stroke modest because the short covers caution against over-long strokes. Order magnet or no-magnet via the trailing S (this SKU has it) and pick PT (default) or G threads; confirm side-load limits with us.
Applications
Automated pick-and-place
Double acting strokes in both directions plus the fitted magnet give end-of-arm position feedback, while 6-way fixing orients the compact body in tight gripper frames.
Press-fit and small assembly
About 245.4 N of push at 0.5 MPa suits light press-fit jobs, and the 10mm adjustable range lets the assembly station trim its stroke without hardware changes.
Indexing on dense tooling
Side-by-side mounting packs multiple cylinders along one indexing rail, with bumper cushioning protecting each index move in a compact layout.
FAQ
What does the S at the end of MDJ25X30-10S mean?
The trailing S indicates this cylinder is supplied with a magnet fitted, so magnetic position switches in the body's switch slots can detect rod position. The same cylinder without the S is supplied without a magnet.
Can I rely on a long stroke with this compact body?
Keep the base stroke within the bore's table (bore 25 allows up to 60 mm; this SKU uses 30 mm plus a 10mm adjustable range). The short covers caution against over-long strokes, and exact dimensions and side-load data come from the datasheet.