Airtac MDJ Adjustable Cylinder MDJ32X30-10S
The AirTAC Airtac MDJ Adjustable Cylinder MDJ32X30-10S is a genuine MD multi-mount cylinder (adjustable stroke), 32 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 402.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, adjustable stroke
- SeriesMD (standard)
- Bore32 mm
- Push thrust @0.5 MPa402.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ32X30-10S
The AirTAC MDJ is an adjustable-stroke multi-mount cylinder: a compact square-body pneumatic cylinder that fixes from six directions - front, back, left, right, top and bottom - and mounts side by side to save space. This 32 mm bore, double-acting model has a 30 mm base stroke plus a 10 mm adjustable range, gives about 402.1 N of theoretical push force at 0.5 MPa (345.6 N on the pull side), and cushions travel with a bumper. Magnetic-switch slots run around the body, so position sensing is easy to add, and the guides hold high precision without added lubrication.
This is a genuine AirTAC part and this SKU carries the magnet option, shown by the trailing S in the code. Within the multi-mount range, MD is the standard family and MK is the no-rotating version whose plate stops the rod turning; MDJ is the adjustable-stroke variant of the MD family. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi) and tolerates -20 to 70 C (up to 150 C only with the optional high-temperature seal material). We confirm dimensions and sizing from the datasheet on request.
Airtac MDJ Adjustable Cylinder MDJ32X30-10S Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ32X30-10S |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MD (standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 402.1 N |
| Port size | 1/8" (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
The 32 mm bore gives the highest thrust in the multi-mount series - 402.1 N theoretical push at 0.5 MPa for this double-acting model - so pick it when your clamp or push station needs real force in a compact envelope. MDJ suits setups that need stroke fine-tuning: this SKU pairs a 30 mm stroke with a 10 mm adjustable range (MDJ ranges are 10, 20 or 30 mm). Respect the bore 32 stroke table, up to 60 mm double acting; the short covers caution against an over-long stroke. The trailing S means the magnet is fitted on this SKU, so magnetic-switch slots on the body work with position switches; delete the S if you do not need sensing. Ports are 1/8" with PT thread; G thread is available. For allowable side load, route to us and the datasheet.
Applications
Pick-and-place part ejection
Mount the cylinder at the end of a pick-and-place head or nest to push finished parts off a pallet, with the magnet letting a switch confirm the extended position before the next cycle starts.
Conveyor gate stopper
Fix the body to the conveyor frame and extend the rod to stop cartons at a workstation; the 10 mm adjustable range sets the exact stop face, and the magnet signals stopper-up or stopper-down.
Press-fit and staking stations
Bolt several cylinders side by side on a staking plate and use the adjustable range to even out pin heights across the part; the bumper cushions the end of each short press stroke.
FAQ
What does the S at the end of MDJ32X30-10S mean?
The trailing S means this SKU is supplied with the magnet fitted, so the magnetic-switch slots around the body can be used for position detection. The same cylinder without the S (for example MDJ32X30-10) is the version without the magnet. The rest of the code decodes as: MDJ adjustable-stroke MD family, 32 mm bore, 30 mm stroke, 10 mm adjustable range.
Can I mount this cylinder in any orientation?
Yes - the multi-mount square body fixes from six directions: front, back, left, right, top and bottom, and cylinders can sit side by side to save space. For allowable side load figures and exact mounting dimensions, which depend on the stroke, ask us and we will confirm them from the datasheet.