Airtac MDJ Adjustable Cylinder MDJ32X30-30S
The AirTAC Airtac MDJ Adjustable Cylinder MDJ32X30-30S is a genuine MD multi-mount cylinder (adjustable stroke), 32 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 402.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, adjustable stroke
- SeriesMD (standard)
- Bore32 mm
- Push thrust @0.5 MPa402.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ32X30-30S
The MDJ32X30-30S is an AirTAC MDJ adjustable-stroke multi-mount cylinder: a compact square-body double-acting cylinder that can be fixed from six directions - front, back, left, right, top and bottom - and mounted side by side to save space. With a 32mm bore and a 30mm stroke plus a 30mm adjustable range, it produces about 402.1 N of theoretical push thrust at 0.5 MPa (the pull side is lower), cushioned by a bumper, running 30-500 mm/s on air filtered to 40 um.
This is a genuine AirTAC part in the standard MD family, where the rod is free to turn unless your tooling prevents it; MK is the no-rotating alternative. The trailing S means the magnet is included, ready for the magnetic-switch slots around the body. Operating range is 0.15-1.0 MPa (22-145 psi) at -20 to 70 C. We confirm dimensions and sizing from the datasheet on request.
Airtac MDJ Adjustable Cylinder MDJ32X30-30S Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ32X30-30S |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MD (standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 402.1 N |
| Port size | 1/8" (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Select the 32mm bore when you need up to 402.1 N theoretical push at 0.5 MPa. MD permits rod rotation, while MK prevents it. This MDJ is double acting with an adjustable stroke: 30mm base stroke plus a 30mm adjustable range; bore 32 double-acting strokes run up to 60mm. The trailing S means the magnet is fitted; thread is PT (G available). Because the cover is short, avoid over-long strokes, and route side-load questions to us.
Applications
Vertical lift-and-lower
Lift a small tray a short distance in a compact cell, mounting the cylinder from the top face of the frame and setting travel within the adjustable range.
Automated clamping station
Clamp parts in a rotary indexing table station, with the magnet and body slots signalling clamp and unclamp positions to the PLC.
Escapement stopper
Stop and release parts one at a time on a feed track, with the bumper cushion softening each stop and side-by-side mounting fitting the narrow track.
FAQ
How much thrust does the 32mm bore of MDJ32X30-30S provide?
The theoretical push thrust at 0.5 MPa is about 402.1 N; the pull side is lower. Operating pressure for this double-acting MD bore 32 model is 0.15-1.0 MPa (22-145 psi).
How does the adjustable stroke work, and is the magnet included?
The MDJ code adds a 30mm adjustable range on top of the 30mm base stroke, letting you set the effective travel. The trailing S confirms the magnet is included for the magnetic-switch slots around the body. Exact dimensions per stroke come from the datasheet - ask us and we will confirm.