Airtac MDJ Adjustable Cylinder MDJ32X35-10S
The AirTAC Airtac MDJ Adjustable Cylinder MDJ32X35-10S is a genuine MD multi-mount cylinder (adjustable stroke), 32 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 402.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, adjustable stroke
- SeriesMD (standard)
- Bore32 mm
- Push thrust @0.5 MPa402.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ32X35-10S
The MDJ32X35-10S is a compact multi-mount cylinder with a square body that can be fixed from six directions - front, back, left, right, top and bottom - and mounted side by side to save space on crowded fixtures. This is the adjustable-stroke, double acting MD variant with a 32 mm bore and a 35 mm base stroke, extended by a 10 mm adjustable range so you can fine-tune the effective stroke on the machine. At 0.5 MPa the bore delivers a theoretical push thrust of 402.1 N, and the cushion is a bumper.
This is a genuine AirTAC part in the standard MD family (the MK family is the no-rotating version). The SKU includes the magnet option, so magnetic-switch slots around the body are ready for your switches. Dimensions and sizing for this specific stroke are per the datasheet - we confirm them on request.
Airtac MDJ Adjustable Cylinder MDJ32X35-10S Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ32X35-10S |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MD (standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 402.1 N |
| Port size | 1/8" (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Choose the bore for thrust: at 32 mm this cylinder gives a theoretical 402.1 N push and 345.6 N pull at 0.5 MPa, double acting. MD allows rod rotation; if your load must not turn, step over to the MK family. The acting type here is double acting with adjustable stroke, and the 35 mm base stroke sits within the bore 32 table (up to 60 mm) with a 10 mm adjustable range added on top (ranges of 10, 20 or 30 mm are offered). The trailing S means the magnet is included; port thread is PT, with G available. Note the short cover limits stroke length, so do not spec an over-long stroke, and route side-load questions to us.
Applications
Multi-station small-parts clamping
Bolt the square body to the top or side of a machining fixture and clamp small parts at each station. The 402.1 N push at 0.5 MPa handles light clamping while the 10 mm adjustable range dials in contact height.
Adjustable stopper on a conveyor lane
Fix the cylinder to the frame from the top or side and extend the rod as a stopper to hold parts at a workstation, with the adjustable stroke setting the exact stop position for each product size.
Jig positioning with fine stroke trim
Use the cylinder to push parts against a jig datum. The 6-direction mounting lets it sit side by side with neighbours on a dense fixture, and the 10 mm adjustable range trims the press-in depth without shimming.
FAQ
What does the -10 in MDJ32X35-10S mean?
MDJ is the adjustable-stroke MD variant. The code reads as 32 mm bore, 35 mm base stroke, and a 10 mm adjustable range added on top of that base stroke. Ranges of 10, 20 or 30 mm are available. The trailing S means the magnet is fitted, and with no letter after it the port thread is PT.
How far can I extend the stroke, and what loads can the rod take sideways?
The bore 32 double acting table goes up to a 60 mm stroke, but the short cover means you should avoid specifying an over-long stroke. Allowable side-load is not a published figure here - confirm it from the datasheet or ask us, and we will size the application with you.