Airtac MDJ Adjustable Cylinder MDJ32X5-10
The AirTAC Airtac MDJ Adjustable Cylinder MDJ32X5-10 is a genuine MD multi-mount cylinder (adjustable stroke), 32 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 402.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, adjustable stroke
- SeriesMD (standard)
- Bore32 mm
- Push thrust @0.5 MPa402.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionBumper
- MagnetWithout magnet
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ32X5-10
The AirTAC MDJ multi-mount cylinder is a compact square-body actuator that fixes from six directions - front, back, left, right, top and bottom - so units mount side by side and save space. This MDJ32X5-10 is the adjustable-stroke, double-acting version with a 32 mm bore, a very short 5 mm stroke and a 10 mm adjustable range as coded, suited to micro-stroke push, eject and locate jobs. At 0.5 MPa it develops a theoretical push force of 402.1 N, and its cushion is a bumper. Magnetic-switch slots run around the body, with high guide precision and no added lubricant needed.
This is a genuine AirTAC part in the standard MD family, so rod rotation is not prevented - choose the MK family if the rod must not turn. The SKU shows no magnet; magnet-equipped versions carry an S suffix. Air filtered to 40 um is the medium; operating pressure is 0.15-1.0 MPa (22-145 psi) and the temperature range is -20 to 70 C, extendable to 0-150 C only with the optional high-temperature seal material. Overall dimensions vary with stroke, so confirm sizing from the datasheet or ask us.
Airtac MDJ Adjustable Cylinder MDJ32X5-10 Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ32X5-10 |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MD (standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 402.1 N |
| Port size | 1/8" (PT thread) |
| Magnet | Without magnet |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Select the bore for thrust: at 0.5 MPa this 32 mm bore gives a theoretical 402.1 N push and 345.6 N pull in double-acting service. Choose MD if rod rotation is acceptable and MK if it is not. Acting choices are double acting (MD/MK), single push (MSD/MSK), single pull (MTD/MTK), double rod (MDD/MKD) and adjustable stroke (MDJ/MKJ). Double-acting bore 32 strokes run up to 60 mm, but this SKU uses a 5 mm stroke with a 10 mm adjustable range - the short cover suits micro-stroke work, so avoid an over-long stroke. Add S for a magnet and pick PT (default) or G thread; route side-load questions to us.
Applications
Micro-stroke part ejection
Eject or kick small parts out of nests and chutes with a 5 mm stroke and the 32 mm bore's 402.1 N theoretical push, where the short compact body fits inside tight tooling.
Test-rig actuation
Apply short, controlled push motions in bench-top test rigs and lab fixtures, using the 10 mm adjustable range to set the exact travel the test needs.
Fine positioning and depth setting
Set precise contact points for marking, pressing or indexing pins, with the adjustable range replacing shims and re-machined stops.
FAQ
Why choose a 5 mm stroke with a 10 mm adjustable range?
MDJ32X5-10 is built for micro-stroke jobs: the piston moves just 5 mm, and the coded 10 mm adjustable range lets you set the effective travel precisely. The compact cover means an over-long stroke should be avoided, and double-acting bore 32 strokes are available up to 60 mm if you need more travel.
How much force does this cylinder produce?
At 0.5 MPa the 32 mm bore gives a theoretical push force of 402.1 N and a pull force of 345.6 N in double-acting use. Operating pressure is 0.15-1.0 MPa (22-145 psi).