Airtac MDJ Adjustable Cylinder MDJ32X60-10
The AirTAC Airtac MDJ Adjustable Cylinder MDJ32X60-10 is a genuine MD multi-mount cylinder (adjustable stroke), 32 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 402.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, adjustable stroke
- SeriesMD (standard)
- Bore32 mm
- Push thrust @0.5 MPa402.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionBumper
- MagnetWithout magnet
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ32X60-10
The MDJ32X60-10 is an AirTAC MDJ adjustable-stroke multi-mount cylinder with a 32 mm bore and 60 mm base stroke, plus a 10 mm adjustable range on top of that. As a multi-mount body it fixes from 6 directions - front, back, left, right, top and bottom - and mounts side by side to save space, with magnetic-switch slots machined around the body. This is a double-acting cylinder cushioned by a bumper, and at 0.5 MPa the bore delivers a theoretical push force of 402.1 N, which suits clamping and positioning jobs on larger parts. It runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), with a proof pressure of 1.5 MPa (215 psi) and an operating temperature of -20 to 70 C (0 to 150 C only with the optional high-temperature seal material).
This is a genuine AirTAC part in the MD standard series (rotation of the rod is not prevented; choose the MK family if you need no-rotating). This SKU does not include a magnet, so confirm your sensing plan before ordering if switch feedback matters to you. Typical materials include an aluminium-alloy body, covers and piston, a stainless or S45C rod, NBR seals and a TPU bumper. We confirm exact dimensions and sizing for your stroke from the datasheet on request.
Airtac MDJ Adjustable Cylinder MDJ32X60-10 Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ32X60-10 |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MD (standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 402.1 N |
| Port size | 1/8" (PT thread) |
| Magnet | Without magnet |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Choose the bore for thrust: at 0.5 MPa this 32 mm bore gives 402.1 N theoretical push (345.6 N pull), the highest in the MD/MK range. The MDJ variant is double acting with an adjustable stroke: the base stroke is 60 mm - the maximum listed for a bore 32 double-acting cylinder, so keep the cover caution in mind - and the -10 suffix adds a 10 mm adjustable range you can set on site. If you would rather have rotation prevented at the rod, pick the MKJ no-rotating variant instead; if you need a built-in magnet for switch sensing, select the MDJ32X60-10S. Thread is PT as standard on the 1/8" port; a G-thread suffix is available. Allowable side-load figures are bore-specific, so route that check to us and we will confirm from the datasheet.
Applications
Pallet clamp on a machining fixture
A double-acting 32 mm bore pushing 402.1 N at 0.5 MPa clamps machined pallets firmly, and the 10 mm adjustable range lets the setter trim the clamp position without swapping cylinders.
Stopper gate on an assembly conveyor
Mounted top or bottom on the conveyor frame, the square body fixes from 6 directions and the bumper cushion softens each stop as the gate rises to halt workpieces.
Ejector in a small press or forming die
Side-by-side mounting lets two cylinders share a compact die plate, and the adjustable stroke dials in the ejection distance for different part heights.
FAQ
What does the -10 in MDJ32X60-10 mean?
MDJ is the adjustable-stroke variant of the MD family. The code reads as a 32 mm bore with a 60 mm base stroke, and the -10 adds a 10 mm adjustable range on top, so you can fine-tune the end position on site. The S in codes such as MDJ32X60-10S would indicate a built-in magnet; this SKU has no magnet.
How many ways can I fix this cylinder, and how far can I stretch the stroke?
The multi-mount body fixes from 6 directions - front, back, left, right, top and bottom - so you can bolt it wherever the machine layout demands. Note that 60 mm is the maximum listed stroke for a bore 32 double-acting cylinder, so treat longer requests with care; for exact dimensions and side-load limits, confirm from the datasheet with us.