Airtac MDJ Adjustable Cylinder MDJ32X60-30
The AirTAC Airtac MDJ Adjustable Cylinder MDJ32X60-30 is a genuine MD multi-mount cylinder (adjustable stroke), 32 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 402.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, adjustable stroke
- SeriesMD (standard)
- Bore32 mm
- Push thrust @0.5 MPa402.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionBumper
- MagnetWithout magnet
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ32X60-30
The MDJ32X60-30 is an adjustable-stroke multi-mount cylinder with a 32 mm bore and 60 mm base stroke, plus a further 30 mm of adjustable stroke on top. The compact square body fixes from 6 directions - front, back, left, right, top and bottom - and cylinders can be mounted side by side to save space. As a double-acting cylinder it delivers a theoretical push thrust of 402.1 N at 0.5 MPa, and the cushion is a bumper. The code carries no trailing S, so this unit is supplied WITHOUT a magnet.
This is a genuine AirTAC part in the MD standard family - the rod is free to rotate, unlike the MK no-rotating family. Medium is air filtered to 40 um, operating pressure is 0.15-1.0 MPa (22-145 psi), speed is 30-500 mm/s, and the temperature range is -20 to 70 C (0 to 150 C only with the optional high-temperature seal material). We confirm overall dimensions and sizing from the datasheet on request.
Airtac MDJ Adjustable Cylinder MDJ32X60-30 Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ32X60-30 |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MD (standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 402.1 N |
| Port size | 1/8" (PT thread) |
| Magnet | Without magnet |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Pick the 32 mm bore when thrust matters most: 402.1 N theoretical push at 0.5 MPa. The MDJ adjustable-stroke variant adds a 30 mm adjustable range on top of the 60 mm stroke, useful for tuning end-of-stroke positions. The MD family allows rod rotation; choose the MK no-rotating family when the rod must not turn. Keep the stroke within the bore's table - bore 32 double-acting units go up to 60 mm, and the compact covers caution against over-long strokes. Side-load figures are not stated here - confirm from the datasheet or ask us. This SKU has no magnet and uses the PT thread; a magnet version (S) and G thread are available.
Applications
Fixture positioning
Fix the body from 6 directions on a machining fixture and use the 30 mm adjustable range to dial in the exact stop position for workpieces, all within a tight footprint.
Indexing on conveyors
Drive an indexing or push-off motion on a conveyor line with 402.1 N of push at 0.5 MPa, mounting cylinders side by side along the line to save frame space.
Small-parts clamping
Clamp small parts in assembly fixtures, with the double-acting bumper-cushioned stroke protecting the fixture and the adjustable range setting the clamp depth.
FAQ
How does the adjustable stroke work on the MDJ32X60-30?
The base stroke is 60 mm and the MDJ design adds a 30 mm adjustable range on top, so you can set the effective stroke shorter than the full travel to suit the job. The magnet is not fitted on this SKU (no trailing S), and the port thread is PT.
Does the rod rotate, and where do I find dimensions and side-load limits?
As an MD family cylinder the rod is free to rotate; if rotation must be prevented, use the MK no-rotating family instead. Overall dimensions vary with stroke and side-load limits are not stated here - confirm both from the datasheet or ask us before designing the mounting.