Airtac MDJ Adjustable Cylinder MDJ32X60-30S
The AirTAC Airtac MDJ Adjustable Cylinder MDJ32X60-30S is a genuine MD multi-mount cylinder (adjustable stroke), 32 mm bore. Its compact square body fixes from six directions and mounts side by side to save space. It delivers about 402.1 N of push force at 0.5 MPa. A bumper cushions the impact.
- TypeMulti-mount, adjustable stroke
- SeriesMD (standard)
- Bore32 mm
- Push thrust @0.5 MPa402.1 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionBumper
- MagnetWith magnet (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MDJ Adjustable Cylinder MDJ32X60-30S
The MDJ32X60-30S is an adjustable-stroke multi-mount cylinder with a 32 mm bore and 60 mm base stroke, plus a further 30 mm of adjustable stroke on top. The compact square body fixes from 6 directions - front, back, left, right, top and bottom - and cylinders can be mounted side by side to save space. As a double-acting cylinder it delivers a theoretical push thrust of 402.1 N at 0.5 MPa, and the cushion is a bumper. The trailing S means this unit is supplied WITH a magnet for position detection in the magnetic-switch slots around the body.
This is a genuine AirTAC part in the MD standard family - the rod is free to rotate, unlike the MK no-rotating family. Medium is air filtered to 40 um, operating pressure is 0.15-1.0 MPa (22-145 psi), speed is 30-500 mm/s, and the temperature range is -20 to 70 C (0 to 150 C only with the optional high-temperature seal material). We confirm overall dimensions and sizing from the datasheet on request.
Airtac MDJ Adjustable Cylinder MDJ32X60-30S Technical Specifications
| Model | Airtac MDJ Adjustable Cylinder MDJ32X60-30S |
|---|---|
| Type | Multi-mount cylinder, adjustable stroke |
| Series | MD (standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 402.1 N |
| Port size | 1/8" (PT thread) |
| Magnet | With magnet (S) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper |
| Mounting | Fix from 6 directions; mountable side by side |
Specifications follow the official AirTAC MD/MK multi-mount data. The front cover and piston are short, so avoid an over-long stroke. An optional high-temperature seal material extends the range to 0 to 150 C. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Select the 32 mm bore for the highest thrust in the range: 402.1 N theoretical push at 0.5 MPa. The MDJ adjustable-stroke variant adds a 30 mm adjustable range on top of the 60 mm stroke for fine end-position tuning. The MD family allows rod rotation; switch to the MK no-rotating family if rotation must be prevented. Keep the stroke within the bore's table - bore 32 double-acting units go up to 60 mm, and the compact covers caution against over-long strokes. Side-load figures are not stated here - confirm from the datasheet or ask us. This SKU includes the magnet (S) and uses the PT thread; G thread is available on request.
Applications
Pick-and-place lifting
Drive the vertical lift on a pick-and-place head with 402.1 N of push at 0.5 MPa, using the magnet to signal end-of-stroke positions to the machine controller.
Jig and fixture clamping
Fix the square body from 6 directions inside an assembly jig to clamp workpieces, with the 30 mm adjustable range setting the clamp depth per product variant.
Stopper actuation on lines
Actuate stoppers along a conveyor line, mounting cylinders side by side in a compact frame and using the magnet for position feedback at each stop.
FAQ
Is the magnet fitted on the MDJ32X60-30S, and how do I decode the rest of the code?
Yes - the trailing S means the cylinder is supplied WITH a magnet, detected via the magnetic-switch slots around the body. The code decodes as MDJ adjustable-stroke MD family (double acting), 32 mm bore, 60 mm stroke, with a 30 mm adjustable range, PT thread (no trailing G).
Can the stroke be set shorter, and what should I check before mounting?
The 30 mm adjustable range lets you set the effective stroke shorter than the full 60 mm travel. Before mounting, use the 6-direction fixing to suit the layout, keep the stroke within the bore's table since the short covers caution against over-long strokes, and confirm dimensions and side-load limits from the datasheet.